(8) Start key
When the Start key is lit green, pressing this key starts feeding of originals placed on the document tray. Key functions are disabled when this key is lit red. When this key is blinking green, this indicates that manual thickness adjustment is in progress. To start feeding, end this adjustment. (See “Manual Thickness Adjustment” P. 53)
(9) Feeding Option key
Select the document feed mode. (See “Selecting the Feeding Option” P. 45) Each press of the Feeding Option key changes the lamp indication on its right cyclically as follows:
OFF (Remote Mode) →
Remote: The three lamps are all out. The document is fed when the scanner receives a scan start instruction from the computer.
Auto: The scanner automatically feeds the document when you load the document.
Manual: Manually load the document one sheet at a time.
(10) Brightness key
Set the brightness when the document is scanned.
To automatically adjust the brightness, press the [A] key.
To manually set the brightness, press the 
or 
key with the [A] key out, and move the indication on the key indicator to adjust the brightness. (Moving the indicator to the right increases the brightness, and to the left decreases the brightness. The brightness can be adjusted in 13 steps.)
If you press the 
or 
key with the [A] key lit to adjust the indicator, the automatic adjustment level is adjusted.
This key is also used for setting paper thickness when manually adjusting the paper thickness, for setting the count start value in the Count Only mode, and for setting in the user mode.
MEMO
●The brightness setting is disabled for images to be scanned to film.
●Brightness can be automatically adjusted only when brightness is set to “Auto” in the scan condition setup on the application and the scan mode is set to “Black and White”.
Foe details, refer to the separate “ISIS/TWAIN Driver Instructions” or “Scanning Utility 5060 Instructions.”
(11)Indicator lamps
This indicator lights when setting the brightness, for example, and moves to the left and right as the 
or 
key is pressed. When manually adjusting the paper thickness, the indicator blinks, and moves to the left and right as the 
or 
key is pressed.
(12) Counter display
This displays the number of scanned document pages. The count value on this display is held even if the scanner is turned OFF, and is cleared by holding the Clear/Stop key down for two seconds.
The counter display also displays the state of the film, user mode, error code and other information.
16Names and Functions of Parts