Avaya Comcode 700220627 manual Installing the new disk drives, Boot disk Drive Boot Disk Slot

Page 41

Upgrading the system

Installing the new disk drives

You have one boot disk drive, and up to nine optional nonboot disk drives. The boot disk drive must be installed in Slot 0, which is on the top shelf. The optional nonboot disk drives must be installed in Slots 1 through 3 and 10 through 15, consecutively. See the following figure.

Boot disk

drive

(Boot Disk - Slot 0)

U
U	Sun	Enterprise
UUUU
U
U
		3000
		XL

0	1	2	3
				U
			U UU	UUU	Sun
U UU	UUU	U UU		U	Sun
U UU	UUU	U UU		UU U

There is a bunch of stuff tha talks about FCC and other such stuff.

There is a bunch of stuff tha talks about FCC and other such stuff.

UUUU	UUUU	Blank
		Blank
		nonboot
		disk drives

10

11

12

13

14

15

e3000_nonmir.cdr

To install the new disk drives:

1.Attach an ESD wrist strap to the metal chassis of the computer and to your wrist.

2.Install the boot disk drive in Slot 0. This disk is labeled “Boot Disk - Slot 0.”

3.If the customer ordered one or more of the optional nonboot disk drives, install them in Slots 1 through 3 and 10 through 15. Do not skip any slots.

4.Disconnect the ESD wrist strap.

5.Continue with Booting up the system with the new disk drives on page 42.

Issue 3.0 February 2002 41

Image 41

Contents TM leee 2002, Avaya Inc All Rights Reserved Preface Overview Disk upgrade procedures Preface Related documents Customer support for the United States Frequently asked questions FAQsTechnician support for the United States Customer and technician support outside the United StatesPage Upgrading an Enterprise 3000 to CMS R3V9 Hardware additions OverviewTrouble escalation Disk mirroring Customization issuesParts list Procedures that are done by the customer before the upgrade Doing a Cmsadm backup Cleaning the tape driveDetermining the current CMS load Enter pkginfo -x cmsCmsadm backup for R3V6 and earlier Upgrading an Enterprise 3000 to CMS R3V9 Procedures that are done by the customer before the upgrade Upgrading an Enterprise 3000 to CMS R3V9 Cmsadm backup for R3V8 Upgrading an Enterprise 3000 to CMS R3V9 Procedures that are done by the customer before the upgrade Backing up Visual Vectors vector layouts and comments Indicates the first noncompressing tape drive with Doing a full maintenance backup System displays the following for R3V8 Field Value to enter or option to select Doing an incremental maintenance backup System displays the following for R3V8 Checking for printer requests and large mail files Cmsadm Checking for nonsequential ACDsCollecting third-party and custom software Upgrading the system Extracting the customer’s administration and options Tail -f /var/tmp/new/var/log/cvuelog CvueextractUpgrading an Enterprise 3000 to CMS R3V9 Has Isql been purchased for this upgrade y or n? Isql will not be installed as part of upgrade Upgrading the system Usr/sbin/shutdown -y -i0 -g0 Pg /var/tmp/new/var/log/cvuelogRemoving and replacing Enterprise 3000 disk drives Disk upgrade proceduresOverview Removing and labeling the old disk drivesE3000removedisk.cdr Boot disk Drive Boot Disk Slot Installing the new disk drivesBooting up the system with the new disk drives Checking the status of the disk drives Verifying that the system recognizes the new disk drivesOpt/informix/bin/setenv Onstat -d egrep X pgLs -x /dev/rmt Checking the status of the tape drivesVerifying that the upgrade can continue Overview Eject cdrom Installing CMS patchesContinue with Copying customer data Cvuecopy Copying customer dataCd /cdrom/cdrom0 Activating customer optionsCvueactivate Tail -f /var/log/cvuelogUpgrading the system Ls -l /adminsave/init.d Continue with Shutting down and rebooting the system Shutting down and rebooting the systemRemoving temporary ACDs Verifying the status of the disksVerifying CMS permissions Pkgchk -n cmsSu cms Turning on CMSVerifying that CMS is operating Checking Free Space Allocation Nohup ./verifyfileproperties /nohup.out Comparing directory and file permissionsVerifyfileproperties Setting the Informix configuration parameters Updating the switch setupCvuecleanup Removing the upgrade filesMigrating the customer’s data Migrating system administration dataDevice name Tape drive device name Data Type Pg /cms/migrate/r3mig.log Migrating agent and call center administration dataAgent/Call Center Admin data Onstat -d egrep Pdrx pg Checking the status of the disksReplacing the customer’s tapes Enter cd /adminsave/init.d Troubleshooting upgrade failuresEnter mv scriptname /adminsave/ where Enter cd /cdrom/cdrom0Checks for devices Adddisks Adds nonboot disks Procedures that are done by the customer after the upgrade Migrating historical data 1159 PM Mt -f /dev/rmt/0 status mt -f /dev/rmt/1 status Restoring non-CMS filesR3V6 and earlier R3V8 Feature or service Responsible Installing and administering unpreserved softwareDoing a Cmsadm backup CMS administration data