Avaya Comcode 700220627 manual Comparing directory and file permissions, Verifyfileproperties

Page 57

Upgrading the system

Comparing directory and file permissions

After you activate the new system, you should verify that the directories and files copied over from the old system retain the same permissions, or that the new permissions are acceptable. The system can compare the permissions of the directories and files.

Because comparing the file permissions may take a long time (30 minutes or more), you may want to run this command in the background so you can continue with other CVUE upgrade procedures.

To compare directory and file permissions:

1.Enter:

cd /cdrom/cdrom0

2.Enter:

./verify_fileproperties

To run this command in the background, enter:

nohup ./verify_fileproperties /nohup.out&

This begins the comparison of the directory and file permissions.

3.After the command is finished, the system displays the following message:

See /var/log/cvue_file_diff for differences

#

4.To view the permission differences after the command is finished, enter: pg /var/log/cvue_file_diff

The file permission differences are displayed. If any file permissions are not appropriate, correct those discrepancies. Any files that are found only on the new system are identified as such and should not be changed.

5.To check the progress of the comparison command while it is still executing, enter: tail -f /var/log/cvue_file_diff

Messages display directory and file permission differences as they are found. Press Del to break out of viewing the file.

6.Continue with Updating the switch setup.

Issue 3.0 February 2002 57

Image 57

Contents TM leee 2002, Avaya Inc All Rights Reserved Preface Overview Disk upgrade procedures Preface Related documents Customer support for the United States Frequently asked questions FAQsTechnician support for the United States Customer and technician support outside the United StatesPage Upgrading an Enterprise 3000 to CMS R3V9 Overview Trouble escalationHardware additions Disk mirroring Customization issuesParts list Procedures that are done by the customer before the upgrade Doing a Cmsadm backup Cleaning the tape driveDetermining the current CMS load Enter pkginfo -x cmsCmsadm backup for R3V6 and earlier Upgrading an Enterprise 3000 to CMS R3V9 Procedures that are done by the customer before the upgrade Upgrading an Enterprise 3000 to CMS R3V9 Cmsadm backup for R3V8 Upgrading an Enterprise 3000 to CMS R3V9 Procedures that are done by the customer before the upgrade Backing up Visual Vectors vector layouts and comments Indicates the first noncompressing tape drive with Doing a full maintenance backup System displays the following for R3V8 Field Value to enter or option to select Doing an incremental maintenance backup System displays the following for R3V8 Checking for printer requests and large mail files Checking for nonsequential ACDs Collecting third-party and custom softwareCmsadm Upgrading the system Extracting the customer’s administration and options Tail -f /var/tmp/new/var/log/cvuelog CvueextractUpgrading an Enterprise 3000 to CMS R3V9 Has Isql been purchased for this upgrade y or n? Isql will not be installed as part of upgrade Upgrading the system Usr/sbin/shutdown -y -i0 -g0 Pg /var/tmp/new/var/log/cvuelogRemoving and replacing Enterprise 3000 disk drives Disk upgrade proceduresOverview Removing and labeling the old disk drivesE3000removedisk.cdr Boot disk Drive Boot Disk Slot Installing the new disk drivesBooting up the system with the new disk drives Checking the status of the disk drives Verifying that the system recognizes the new disk drivesOpt/informix/bin/setenv Onstat -d egrep X pgLs -x /dev/rmt Checking the status of the tape drivesVerifying that the upgrade can continue Overview Eject cdrom Installing CMS patchesContinue with Copying customer data Cvuecopy Copying customer dataCd /cdrom/cdrom0 Activating customer optionsCvueactivate Tail -f /var/log/cvuelogUpgrading the system Ls -l /adminsave/init.d Continue with Shutting down and rebooting the system Shutting down and rebooting the system Removing temporary ACDs Verifying the status of the disks Verifying CMS permissions Pkgchk -n cmsTurning on CMS Verifying that CMS is operatingSu cms Checking Free Space Allocation Comparing directory and file permissions VerifyfilepropertiesNohup ./verifyfileproperties /nohup.out Setting the Informix configuration parameters Updating the switch setupCvuecleanup Removing the upgrade filesMigrating the customer’s data Migrating system administration dataDevice name Tape drive device name Data Type Pg /cms/migrate/r3mig.log Migrating agent and call center administration dataAgent/Call Center Admin data Checking the status of the disks Replacing the customer’s tapesOnstat -d egrep Pdrx pg Enter cd /adminsave/init.d Troubleshooting upgrade failuresEnter mv scriptname /adminsave/ where Enter cd /cdrom/cdrom0Checks for devices Adddisks Adds nonboot disks Procedures that are done by the customer after the upgrade Migrating historical data 1159 PM Restoring non-CMS files R3V6 and earlierMt -f /dev/rmt/0 status mt -f /dev/rmt/1 status R3V8 Feature or service Responsible Installing and administering unpreserved softwareDoing a Cmsadm backup CMS administration data