Avaya Comcode 700220627 manual Overview

Page 46

Upgrading an Enterprise 3000 to CMS R3V9

Copying and activating the customer’s administration and options

Overview

After you verify the new configuration, do the following:

●Install CMS patches.

●Copy the customer’s data from the extract tape onto the system.

●Activate the customer’s options.

●Shut down and reboot the system.

●Remove any temporary ACDs that you created during the extraction phase of the upgrade process.

●Verify CMS permissions.

●Turn on CMS.

●Verify that CMS is operating.

●Check Free Space Allocation (FSA).

●Compare directory and file permissions.

●Update the switch setup.

●Set the Informix configuration parameters.

●Remove the upgrade files.

●Migrate the customer’s data.

●Replace the customer’s tapes in the tape drives.

Note:

When the upgrade is being supported by remote personnel, such as CMS Provisioning, the system commands in this section are for use by remote personnel to monitor the progress of the upgrade. Run the commands from the local console only when instructed to do so, or when there is no remote support.

46 CentreVu CMS R3V9 Sun Enterprise 3000 Computer CVUE Instructions

Image 46

Contents TM leee 2002, Avaya Inc All Rights Reserved Preface Overview Disk upgrade procedures Preface Related documents Technician support for the United States Frequently asked questions FAQsCustomer support for the United States Customer and technician support outside the United StatesPage Upgrading an Enterprise 3000 to CMS R3V9 Trouble escalation OverviewHardware additions Customization issues Disk mirroringParts list Procedures that are done by the customer before the upgrade Determining the current CMS load Cleaning the tape driveDoing a Cmsadm backup Enter pkginfo -x cmsCmsadm backup for R3V6 and earlier Upgrading an Enterprise 3000 to CMS R3V9 Procedures that are done by the customer before the upgrade Upgrading an Enterprise 3000 to CMS R3V9 Cmsadm backup for R3V8 Upgrading an Enterprise 3000 to CMS R3V9 Procedures that are done by the customer before the upgrade Backing up Visual Vectors vector layouts and comments Indicates the first noncompressing tape drive with Doing a full maintenance backup System displays the following for R3V8 Field Value to enter or option to select Doing an incremental maintenance backup System displays the following for R3V8 Checking for printer requests and large mail files Collecting third-party and custom software Checking for nonsequential ACDsCmsadm Upgrading the system Extracting the customer’s administration and options Cvueextract Tail -f /var/tmp/new/var/log/cvuelogUpgrading an Enterprise 3000 to CMS R3V9 Has Isql been purchased for this upgrade y or n? Isql will not be installed as part of upgrade Upgrading the system Pg /var/tmp/new/var/log/cvuelog Usr/sbin/shutdown -y -i0 -g0Overview Disk upgrade proceduresRemoving and replacing Enterprise 3000 disk drives Removing and labeling the old disk drivesE3000removedisk.cdr Installing the new disk drives Boot disk Drive Boot Disk SlotBooting up the system with the new disk drives Opt/informix/bin/setenv Verifying that the system recognizes the new disk drivesChecking the status of the disk drives Onstat -d egrep X pgChecking the status of the tape drives Ls -x /dev/rmtVerifying that the upgrade can continue Overview Installing CMS patches Eject cdromContinue with Copying customer data Copying customer data CvuecopyCvueactivate Activating customer optionsCd /cdrom/cdrom0 Tail -f /var/log/cvuelogUpgrading the system Ls -l /adminsave/init.d Shutting down and rebooting the system Continue with Shutting down and rebooting the systemVerifying CMS permissions Verifying the status of the disksRemoving temporary ACDs Pkgchk -n cmsVerifying that CMS is operating Turning on CMSSu cms Checking Free Space Allocation Verifyfileproperties Comparing directory and file permissionsNohup ./verifyfileproperties /nohup.out Updating the switch setup Setting the Informix configuration parametersRemoving the upgrade files CvuecleanupMigrating system administration data Migrating the customer’s dataDevice name Tape drive device name Data Type Migrating agent and call center administration data Pg /cms/migrate/r3mig.logAgent/Call Center Admin data Replacing the customer’s tapes Checking the status of the disksOnstat -d egrep Pdrx pg Enter mv scriptname /adminsave/ where Troubleshooting upgrade failuresEnter cd /adminsave/init.d Enter cd /cdrom/cdrom0Checks for devices Adddisks Adds nonboot disks Procedures that are done by the customer after the upgrade Migrating historical data 1159 PM R3V6 and earlier Restoring non-CMS filesMt -f /dev/rmt/0 status mt -f /dev/rmt/1 status R3V8 Installing and administering unpreserved software Feature or service ResponsibleDoing a Cmsadm backup CMS administration data