Upgrading an Enterprise 3000 to CMS R3V9
4.Enter a tape drive selection from the displayed list. The system displays the following message:
Please insert the first cartridge tape into <device name>.
Press ENTER when ready or Del to quit:
5.Press Enter.
The backup process begins. If more than one tape is required, the system displays the following message:
End of medium on "output".
Please remove the current tape, number it, insert tape number x, and press Enter
6.If the system displays the message in Step 5, insert the next tape and allow it to rewind. When it is properly positioned, press Enter.
7.When the backup is completed, the system displays information according to the number of tapes that are required for the backup:
●If the number of tapes required is one, the system displays the following message:
xxxxxxxblocks
Tape Verification xxxxxxx blocks
WARNING: A CMS Full Maintenance Backup in addition to this cmsadm backup must be done to have a complete backup of the system. . .
. .
Please label the backup tape(s) with the date and the current CMS version (R3V8xx.x)
Continue with Step 10.
●If the number of tapes required is more than one, the system displays the following message:
xxxxxxxblocks
Tape Verification
Insert the first tape
Press Return to proceed :
8.Insert the first tape to be used in the backup and press Enter. When the LED on the tape drive stops blinking, remove the tape.
20 CentreVu CMS R3V9 Sun Enterprise 3000 Computer CVUE Instructions