Avaya Comcode 700220627 manual Removing the upgrade files, Cvuecleanup

Page 59

Upgrading the system

Removing the upgrade files

The files used for the upgrade must be removed.

To remove the upgrade files:

1.Enter:

cd /cdrom/cdrom0

2.Do one of the following:

●If running the command locally at the console, enter:

./cvue_cleanup

●Optionally, if running the command remotely on a dial-up line, enter: nohup ./cvue_cleanup tee /nohup.out

! CAUTION:

If the dial-up modem line drops after starting this command with nohup, reconnect to the system, but DO NOT rerun this command. Use tail -f /nohup.outto view the progress of the command. When finished viewing the nohup.out file, press Del to break out of the command.

Note that since the number of files to remove is large, this procedure takes several minutes to complete. When the files are removed, the system displays the following message:

The cvue_cleanup process is complete...Wed Aug 23 13:56:00 MDT 2000

#

3.Enter: cd /

4.Enter:

eject cdrom

5.Remove the CVUE Upgrade Tool CD. Save the CD with the other customer software in case you have to run the upgrade tool again.

6.Continue with Migrating the customer’s data.

Issue 3.0 February 2002 59

Image 59

Contents TM leee 2002, Avaya Inc All Rights Reserved Preface Overview Disk upgrade procedures Preface Related documents Customer and technician support outside the United States Frequently asked questions FAQsCustomer support for the United States Technician support for the United StatesPage Upgrading an Enterprise 3000 to CMS R3V9 Hardware additions OverviewTrouble escalation Disk mirroring Customization issuesParts list Procedures that are done by the customer before the upgrade Enter pkginfo -x cms Cleaning the tape driveDoing a Cmsadm backup Determining the current CMS loadCmsadm backup for R3V6 and earlier Upgrading an Enterprise 3000 to CMS R3V9 Procedures that are done by the customer before the upgrade Upgrading an Enterprise 3000 to CMS R3V9 Cmsadm backup for R3V8 Upgrading an Enterprise 3000 to CMS R3V9 Procedures that are done by the customer before the upgrade Backing up Visual Vectors vector layouts and comments Indicates the first noncompressing tape drive with Doing a full maintenance backup System displays the following for R3V8 Field Value to enter or option to select Doing an incremental maintenance backup System displays the following for R3V8 Checking for printer requests and large mail files Cmsadm Checking for nonsequential ACDsCollecting third-party and custom software Upgrading the system Extracting the customer’s administration and options Tail -f /var/tmp/new/var/log/cvuelog CvueextractUpgrading an Enterprise 3000 to CMS R3V9 Has Isql been purchased for this upgrade y or n? Isql will not be installed as part of upgrade Upgrading the system Usr/sbin/shutdown -y -i0 -g0 Pg /var/tmp/new/var/log/cvuelogRemoving and labeling the old disk drives Disk upgrade proceduresRemoving and replacing Enterprise 3000 disk drives OverviewE3000removedisk.cdr Boot disk Drive Boot Disk Slot Installing the new disk drivesBooting up the system with the new disk drives Onstat -d egrep X pg Verifying that the system recognizes the new disk drivesChecking the status of the disk drives Opt/informix/bin/setenvLs -x /dev/rmt Checking the status of the tape drivesVerifying that the upgrade can continue Overview Eject cdrom Installing CMS patchesContinue with Copying customer data Cvuecopy Copying customer dataTail -f /var/log/cvuelog Activating customer optionsCd /cdrom/cdrom0 CvueactivateUpgrading the system Ls -l /adminsave/init.d Continue with Shutting down and rebooting the system Shutting down and rebooting the systemPkgchk -n cms Verifying the status of the disksRemoving temporary ACDs Verifying CMS permissionsSu cms Turning on CMSVerifying that CMS is operating Checking Free Space Allocation Nohup ./verifyfileproperties /nohup.out Comparing directory and file permissionsVerifyfileproperties Setting the Informix configuration parameters Updating the switch setupCvuecleanup Removing the upgrade filesMigrating the customer’s data Migrating system administration dataDevice name Tape drive device name Data Type Pg /cms/migrate/r3mig.log Migrating agent and call center administration dataAgent/Call Center Admin data Onstat -d egrep Pdrx pg Checking the status of the disksReplacing the customer’s tapes Enter cd /cdrom/cdrom0 Troubleshooting upgrade failuresEnter cd /adminsave/init.d Enter mv scriptname /adminsave/ whereChecks for devices Adddisks Adds nonboot disks Procedures that are done by the customer after the upgrade Migrating historical data 1159 PM Mt -f /dev/rmt/0 status mt -f /dev/rmt/1 status Restoring non-CMS filesR3V6 and earlier R3V8 Feature or service Responsible Installing and administering unpreserved softwareDoing a Cmsadm backup CMS administration data