Avaya Comcode 700220627 manual Upgrading an Enterprise 3000 to CMS R3V9

Page 16

Upgrading an Enterprise 3000 to CMS R3V9

4.Enter the number for the tape drive that is installed on your system.

The system displays the following message and calculates the approximate number of tapes that are required for the backup. Note that this is an approximation, and more tapes may be needed.

Calculating approximate number of tapes required. Please wait.

If only one tape is required, the system displays the following message:

The backup will need approximately 1 tape.

Please insert the first cartridge tape into </dev/rmt/X>.

Press ENTER when ready:

If more than one tape is required, the system displays the following message:

The backup will need approximately <X> tapes.

Be sure to number the cartridge tapes consecutively in the order they will be inserted.

Please insert the first cartridge tape into </dev/rmt/x>.

Press ENTER when ready:

5.To begin the backup, insert the first cartridge tape, wait for the tape to rewind and reposition, and then press Enter.

The system displays the following message:

The backup is about to begin. CMS is currently on.

CMS will be turned off automatically during that portion of the backup which needs CMS off.

Press ENTER to proceed or Del to quit:

16 CentreVu CMS R3V9 Sun Enterprise 3000 Computer CVUE Instructions

Image 16

Contents TM leee 2002, Avaya Inc All Rights Reserved Preface Overview Disk upgrade procedures Preface Related documents Frequently asked questions FAQs Customer support for the United StatesTechnician support for the United States Customer and technician support outside the United StatesPage Upgrading an Enterprise 3000 to CMS R3V9 Trouble escalation OverviewHardware additions Customization issues Disk mirroringParts list Procedures that are done by the customer before the upgrade Cleaning the tape drive Doing a Cmsadm backupDetermining the current CMS load Enter pkginfo -x cmsCmsadm backup for R3V6 and earlier Upgrading an Enterprise 3000 to CMS R3V9 Procedures that are done by the customer before the upgrade Upgrading an Enterprise 3000 to CMS R3V9 Cmsadm backup for R3V8 Upgrading an Enterprise 3000 to CMS R3V9 Procedures that are done by the customer before the upgrade Backing up Visual Vectors vector layouts and comments Indicates the first noncompressing tape drive with Doing a full maintenance backup System displays the following for R3V8 Field Value to enter or option to select Doing an incremental maintenance backup System displays the following for R3V8 Checking for printer requests and large mail files Collecting third-party and custom software Checking for nonsequential ACDsCmsadm Upgrading the system Extracting the customer’s administration and options Cvueextract Tail -f /var/tmp/new/var/log/cvuelogUpgrading an Enterprise 3000 to CMS R3V9 Has Isql been purchased for this upgrade y or n? Isql will not be installed as part of upgrade Upgrading the system Pg /var/tmp/new/var/log/cvuelog Usr/sbin/shutdown -y -i0 -g0Disk upgrade procedures Removing and replacing Enterprise 3000 disk drivesOverview Removing and labeling the old disk drivesE3000removedisk.cdr Installing the new disk drives Boot disk Drive Boot Disk SlotBooting up the system with the new disk drives Verifying that the system recognizes the new disk drives Checking the status of the disk drivesOpt/informix/bin/setenv Onstat -d egrep X pgChecking the status of the tape drives Ls -x /dev/rmtVerifying that the upgrade can continue Overview Installing CMS patches Eject cdromContinue with Copying customer data Copying customer data CvuecopyActivating customer options Cd /cdrom/cdrom0Cvueactivate Tail -f /var/log/cvuelogUpgrading the system Ls -l /adminsave/init.d Shutting down and rebooting the system Continue with Shutting down and rebooting the systemVerifying the status of the disks Removing temporary ACDsVerifying CMS permissions Pkgchk -n cmsVerifying that CMS is operating Turning on CMSSu cms Checking Free Space Allocation Verifyfileproperties Comparing directory and file permissionsNohup ./verifyfileproperties /nohup.out Updating the switch setup Setting the Informix configuration parametersRemoving the upgrade files CvuecleanupMigrating system administration data Migrating the customer’s dataDevice name Tape drive device name Data Type Migrating agent and call center administration data Pg /cms/migrate/r3mig.logAgent/Call Center Admin data Replacing the customer’s tapes Checking the status of the disksOnstat -d egrep Pdrx pg Troubleshooting upgrade failures Enter cd /adminsave/init.dEnter mv scriptname /adminsave/ where Enter cd /cdrom/cdrom0Checks for devices Adddisks Adds nonboot disks Procedures that are done by the customer after the upgrade Migrating historical data 1159 PM R3V6 and earlier Restoring non-CMS filesMt -f /dev/rmt/0 status mt -f /dev/rmt/1 status R3V8 Installing and administering unpreserved software Feature or service ResponsibleDoing a Cmsadm backup CMS administration data