9. Programmable Features
9.5.1 Programmable functions
{C}
//_
{s} 
{ih}
$/, 
{INT}
Helpful hints:
LTo exit programming, press {ih} at any time.
9.5.2 Memo alarm
Setting memo alarm
An alarm will sound for 3 minutes at the set time once or daily. 3 different alarms can be set. A text memo can also be displayed.
Set the date and time beforehand (page 26).
1.Press $(centre of joystick).
2.Select t, then press ,.
3.Select “Memo Alarm”, then press ,.
4.Push the joystick up or down repeatedly to select an alarm (1 to 3).
L Times and memos for previously set alarms will be displayed. To delete the previous setting, press _, select “Yes”, then press ,.
5.Press ,.
6.Select an alarm mode, then press ,. “Off” (default): Turns the alarm OFF.
L If you select “Off” skip to step 13.
“Once”: The alarm will sound once at the set time. Enter the desired date and month by selecting 2 digits for each.
“Daily”: An alarm will sound daily at the set time.
7.Enter the desired hour and minute by selecting 2 digits for each.
8.Press /repeatedly to select “AM”, “PM”, or
L If you do not need to enter a text memo, skip to step 10.
9.Enter a text memo, up to 32 characters (see page 88 for instructions).
10.Press ,.
11.Select the ringer that will sound at the set time.
12.Press ,.
13.Press ,.
14.Press {ih}.
Note:
LTo stop the alarm, press {C}, {ih}, {s},
{0} to {9}, {*}, {#} or {INT}.
LWhen the cordless handset is in talk or intercom mode, the alarm will not sound until
the call has ended.
LMemo alarm volume depends on cordless handset ringer volume (page 25).
LThe alarm will sound at the set time even when the ringer is turned OFF.
LIf you select “Once”, the setting will be changed to “Off” after the alarm sounds.
9.5.3 Ringer options
Changing ringer types
You can select the ringer type for the cordless handset from one of 15 types.
“EXT Ringer Type”: Selects the ringer heard for outside calls.
“INT Ringer Type”: Selects the ringer heard for intercom calls.
“Paging Tone”: Selects the ringer heard when all cordless handsets are paged.
“Private Ring”: Allows you to set a different ringer for each private category (for Caller ID service users only, page 38).
1.Press $(centre of joystick).
2.Select s, then press ,.
3.Select the desired item, then press ,. L The ringer sounds using the current
ringer type.
L If you select “Private Ring” choose the desired category, then press ,.
4.Select the desired ringer type, then press
,.
5.Press {ih}.
Note:
LIf you select one of the melody ringer types, the ringer will continue to sound for 10 seconds if the caller hangs up before you answer. You may hear a dial tone or no one
on the line when you answer a call.
LThe preset melodies in this product are used with permission of
LTo set the base unit ringer type, see feature #17 on page 67.
74