Panasonic KX-FC241AL manual Direct commands for programming features

Page 72

9. Programmable Features

use these tones to confirm the status of the other party’s machine.

“ON” (default): You will hear connecting tones.

“OFF”: Deactivates this feature.

Note:

LIf the ring back tone continues, the other party’s machine may not be a fax machine or

may have run out of paper. Check with the other party.

LThe connecting tone volume cannot be adjusted.

Code #77: Changing the receiving mode in the auto answer setting

AUTO ANSWER

=TAM/FAX [±]

“TAM/FAX” (default): Telephone Answering Machine/Fax mode (page 50)

“FAX ONLY”: Fax only mode (page 52)

Code #80: Resetting advanced features to their default settings

SET DEFAULT

RESET=NO [±]

To reset the advanced features:

1.Press {MENU}.

2.Press {#}, then {8}{0}.

3.Press {A} or {B} repeatedly to select “YES”.

4.Press {SET}.

5.Press {SET} again.

6.Press {MENU}.

Note:

LThe ECM setting (feature #68 on page 69) will not be reset.

LYou can also reset advanced features with the cordless handset (page 80).

9.4Direct commands for programming features

You can also select the desired setting by directly entering the program code (# and a 2-digit number) and direct command.

For more details on the features, see page 66 to page 70.

1Press {MENU}.

2Press {#} and the 2-digit code number.

3Press the desired direct command to display the desired setting.

L This step may be slightly different depending on the feature.

4Press {SET}.

5To exit programming, press {MENU}.

9.4.1Program code and direct command button

{#}{0}{1} Date and time

LEnter the date and time using the dial keypad. See page 27 for details.

{#}{0}{2} Your logo

LEnter your logo using the dial keypad. See page 28 for details.

{#}{0}{3} Your fax number

LEnter your fax number using the dial keypad. See page 29 for details.

{#}{0}{4} Sending report

–{1}: “ON”

–{2}: “OFF”

–{3}: “ERROR” (default)

{#}{0}{6} FAX ring count

–{2}: “2” (default)

–{3}: “3”

–{4}: “4”

–{5}: “5”

–{6}: “6”

–{7}: “7”

–{8}: “8”

–{9}: “9”

{#}{0}{6} TAM ring count

–{0}: “AUTO”

–{2}: “2” (default)

–{3}: “3”

–{4}: “4”

70

Image 72

Contents Operating Instructions How to use the operating instructions OpenLocation of Controls Base unitCordless handset Buttons Listed in alphabetical orderFor your future reference For Australian users For New Zealand usersInstallation Service difficultiesImportant information Instructions to customerImportant safety instructions Important InstructionsBattery Battery chargeFor best performance Operating distance and noiseEnvironment Routine careRecording paper Phonebook Cordless handset programming 100102 103Included accessories QuantityAccessory information Available accessoriesModel No Specifications/Usage Film againButton descriptions of the base unit Button descriptions of the cordless handset Menu Menu/feature Icon Display descriptions of the cordless handsetDisplay icons Display icon MeaningSoft keys Soft key icons Action IconSoft key Action icon Overview 5 6Ink film installation / replacement Installing the ink filmInsert the front ink film roll by inserting its Correct Close the front cover securely IncorrectHandset cord Paper trayReplacing the ink film Connect the handset cordRecording paper Push the tension plate backCorrectIncorrect Battery installation / replacement Installing the batteriesReplacing the batteries BatteriesConnections Charger unitBattery charge Turning the cordless handset power ON/OFF Power onPower OFF Base unit help functionINT Date and time With the cordless handsetIf you have subscribed to a Caller ID service With the base unitSET Menu Example 10 August, 2004 Press 10 08Your logo Stop Menu MuteKeypad Characters To enter your logo Example BillTo select characters using a or B Your fax numberStop Menu Your FAX no Press SETEnter the correct number Making phone calls Will be displayed To turn key lock OFF, press for about 2 secondsRedial Digital SP-PHONE Mute To redial the last number dialled from the base unitAnswering phone calls Recording a telephone conversation Cordless handset onlyMaking a phone call using the phonebook Cordless handset phonebookStoring phonebook items To search for a name by initialEditing a stored item Erasing a stored itemHot key Base unit phonebook Erasing a hot keyErase Digital SP-PHONE Stop Menu Press Menu repeatedly to display Phonebook SETTo search for a name by initial Example Lisa Another method to erase a stored itemCaller ID service How Caller ID is displayedTo print manually, see Private categoryViewing and calling back using caller information Caller IDFAX/START Digital SP-PHONE Erasing caller information Press Stop after stepTo delete a number To insert a numberStoring caller information into the phonebook Into the cordless handset phonebookInto the base unit phonebook Erasing all caller informationCall minder for New Zealand users only Sending a fax manually Stop Redial FAX/START Digital SP-PHONEDocuments you can send Sending a fax using the base unit phonebook Broadcast transmissionProgramming items into the broadcast memory Adding a new item into the broadcast memoryTo cancel broadcast transmission Erasing a stored item from the broadcast memorySending the same document to pre-programmed parties To send the same document to a one-time group of partiesSetup Selecting the way to use your fax machineYour situation FAX/STARTUse only as a fax FAX only mode Use mostly as a telephone TEL modeHow faxes are received Activating TEL mode Activating TEL mode with the cordless handsetHow to receive phone calls and faxes with the base unit Receiving a fax manually Auto answerActivating TAM/FAX mode TAM/FAX ModeReceiving a fax automatically Auto answer on To stop receivingActivating TAM/FAX mode with the cordless handset Ring setting in TAM/FAX modeReceiving a voice message and fax document in one call Activating FAX only mode FAX only ModeActivating FAX only mode with the cordless handset Activating the junk fax prohibitor Storing undesired callersTo display the junk fax prohibitor list To print the junk fax prohibitor listUsing with the ring detection feature SET MenuMore copying features Making a copyStop Start To collate multiple copies Example Making 2 copies of a 4-page original documentRecording your greeting message Erasing your recorded greeting messagePre-recorded greeting message Stop Erase Greeting MICListening to recorded messages Erasing recorded messagesStop Erase Menu Using the answering machine with the cordless handset Leaving a message for others or yourselfRecording your greeting message Operation using the direct commands Listening to recorded messagesLeaving a message for others or yourself To change the ring setting in TAM/FAX mode Programming for answering machineTo set the remote operation ID To change the maximum recording time for incoming messagesAnswering Machine Operating from a remote location Summary of remote operationRemote operation using remote commands Remote operations following voice menuProgramming basic features Programming advanced featuresTo cancel programming Base unit programmingBasic features Advanced features Code #17 Setting the ringer type for outside callsCode #22 Setting the journal report to print automatically Code #23 Sending documents overseasCode #26 Setting the Caller ID list to print automatically Code #28 Setting call barCode #31 Activating the Distinctive Ring feature Code #34 Setting the quick scanCode #44 Setting the memory reception alert Code #46 Setting friendly receptionCode #58 Setting the scan contrast Code #67 Setting the greeting message monitorDirect commands for programming features Program code and direct command button#13 Dialling mode OFF #23 Overseas mode#25 Delayed transmission #76 Connecting tone#80 Set default YES No defaultCordless handset Sub-menu Default setting Settings menu Cordless handset programmingMaximum Category No.*1Memo alarm Setting memo alarmProgrammable functions Ringer optionsTone options Display optionsCall options Other optionsSetting the battery type Resetting the cordless handset to its default settingsCordless handset programming using the base unit Base unit settings Sub-menu Default setting MenuSetting dialling mode tone/pulse For Australian users only Setting pause lengthSetting call restriction Changing the recall lengthSelecting area codes to be deleted automatically Changing the base unit PIN personal identification numberOperating additional units Registering a cordless handset to a base unitCancelling a base unit IntercomBetween cordless handsets Between a cordless handset and the base unitTransferring calls / Conference calls From a cordless handset to the base unitFrom the base unit to a cordless handset Cordless handset locatorCopying cordless handset phonebook items To establish a conference call, pressEstablish an intercom call Changing the Walkie- Talkie mode Walkie-TalkieTurning Walkie-Talkie on Starting Walkie-Talkie conversationsUsing the belt clip Using an optional headsetInsert the connector plug into the headset jack firmly To attach the belt clip To remove the belt clipWall mounting the charger Wall template for chargerAvailable character entries for the cordless handset Character entry modesAlphabetNumericGreek Cyrillic Extended XExtended 1 character table Following are used for both uppercase and lowercaseYExtended 2 character table Cyrillic character tableError messages Reports Error messages Base unit displayModem Error Check PaperClose Tension Plate Cover OpenPolling Error Recording ErrorSerial Error Transmit ErrorWhen a function does not work, check here Initial settingsGeneral Problem Cause & Solution Ink film runs out Returns to standby modeProblem Cause & Solution Cordless handset Charging but the batteryProblem Cause & Solution Static, sound cuts in/out Fades. Interference fromOther electrical units UsedFax sending Fax receivingCopying If a power failure occurs Answering machineHelp When the recording paper has jammed in the unit Recording paper jamsBase unit display will show the following Correct When the recording paper was not fed into the unit properly Document jams sendingRecording paper feeder cleaning Do not use paper products, such as paper towels or tissuesDocument feeder / scanner glass cleaning Thermal head cleaning Reference lists and reports Base unit only Specifications Duplex procedure RF transmission power Approx mW Voice codingMass Weight Approx g StandardIndex 110 111 Sales Department Panasonic Australia Pty. Limited Panasonic New Zealand LimitedManufacturer Panasonic Communications Malaysia Sdn. Bhd Global web site Copyright PFQX2096ZA CM1004YH0