Panasonic KX-FC241AL manual Battery charge

Page 25

3. Preparation

3.2 Battery charge

Place the cordless handset on the charger for about 7 hours before initial use.

The charge indicator (1) turns red while the batteries are charging, and turns green when the batteries are fully charged.

1

2

3

Note:

LClean the cordless handset charge contacts (2) and the charger charge contacts (3) with a soft, dry cloth once a month, otherwise the batteries may not charge properly. Clean more often if the unit is exposed to grease, dust or high humidity.

Battery strength

You can confirm the battery strength on the cordless handset display.

Battery icons	Battery strength

5High

6Medium

7Low

LWhen flashing: Needs to be charged

Note:

LIf the cordless handset is turned OFF, it will be turned ON automatically when it is placed on the charger.

LThe cordless handset will not operate while it

is on the charger.

LIf 7flashes when you lift the cordless handset off the charger, charge the batteries at least 15 minutes.

Battery life

After your Panasonic batteries are fully charged, you can expect the following performance:

Ni-MH Batteries (typical 700 mAh)

Operation	Operating Time
While in use (talking)	10 hours approx.

While not in use	180 hours approx.
(standby)

Ni-Cd Batteries (typical 250 mAh)

Operation	Operating Time
While in use (talking)	4 hours approx.

While not in use	60 hours approx.
(standby)

Note:

LTimes indicated are for peak performance. L Battery operating time may be shortened

depending on usage conditions and ambient temperature.

L Battery power is consumed whenever the cordless handset is off the charger, even when the cordless handset is not in use. The longer you leave the cordless handset off the charger, the less time you can actually talk on the cordless handset.

L The batteries cannot be overcharged unless they are repeatedly removed and replaced.

L For maximum battery life, it is recommended that the cordless handset is not recharged until 7flashes.

23

Image 25

Contents Operating Instructions Open How to use the operating instructionsBase unit Location of ControlsCordless handset Buttons Listed in alphabetical orderFor your future reference For New Zealand users For Australian usersService difficulties InstallationImportant information Instructions to customerImportant Instructions Important safety instructionsBattery charge BatteryFor best performance Operating distance and noiseRoutine care EnvironmentRecording paper Phonebook 100 Cordless handset programming102 103Quantity Included accessoriesAvailable accessories Accessory informationModel No Specifications/Usage Film againButton descriptions of the base unit Button descriptions of the cordless handset Display descriptions of the cordless handset Menu Menu/feature IconDisplay icons Display icon MeaningSoft key icons Action Icon Soft keysSoft key Action icon 5 6 OverviewInstalling the ink film Ink film installation / replacementInsert the front ink film roll by inserting its Incorrect Correct Close the front cover securelyPaper tray Handset cordReplacing the ink film Connect the handset cordPush the tension plate back Recording paperCorrectIncorrect Installing the batteries Battery installation / replacementReplacing the batteries BatteriesCharger unit ConnectionsBattery charge Power on Turning the cordless handset power ON/OFFPower OFF Base unit help functionINT With the cordless handset Date and timeWith the base unit If you have subscribed to a Caller ID serviceSET Menu Example 10 August, 2004 Press 10 08Stop Menu Mute Your logoKeypad Characters To enter your logo Example BillYour fax number To select characters using a or BStop Menu Your FAX no Press SETEnter the correct number Making phone calls To turn key lock OFF, press for about 2 seconds Will be displayedRedial Digital SP-PHONE Mute To redial the last number dialled from the base unitRecording a telephone conversation Cordless handset only Answering phone callsCordless handset phonebook Making a phone call using the phonebookStoring phonebook items To search for a name by initialErasing a stored item Editing a stored itemHot key Erasing a hot key Base unit phonebookErase Digital SP-PHONE Stop Menu Press Menu repeatedly to display Phonebook SETAnother method to erase a stored item To search for a name by initial Example LisaHow Caller ID is displayed Caller ID serviceTo print manually, see Private categoryCaller ID Viewing and calling back using caller informationFAX/START Digital SP-PHONE Press Stop after step Erasing caller informationTo delete a number To insert a numberInto the cordless handset phonebook Storing caller information into the phonebookInto the base unit phonebook Erasing all caller informationCall minder for New Zealand users only Stop Redial FAX/START Digital SP-PHONE Sending a fax manuallyDocuments you can send Broadcast transmission Sending a fax using the base unit phonebookProgramming items into the broadcast memory Adding a new item into the broadcast memoryErasing a stored item from the broadcast memory To cancel broadcast transmissionSending the same document to pre-programmed parties To send the same document to a one-time group of partiesSelecting the way to use your fax machine SetupYour situation FAX/STARTUse mostly as a telephone TEL mode Use only as a fax FAX only modeHow faxes are received Activating TEL mode with the cordless handset Activating TEL modeHow to receive phone calls and faxes with the base unit Receiving a fax manually Auto answerTAM/FAX Mode Activating TAM/FAX modeReceiving a fax automatically Auto answer on To stop receivingRing setting in TAM/FAX mode Activating TAM/FAX mode with the cordless handsetReceiving a voice message and fax document in one call FAX only Mode Activating FAX only modeActivating FAX only mode with the cordless handset Storing undesired callers Activating the junk fax prohibitorTo display the junk fax prohibitor list To print the junk fax prohibitor listSET Menu Using with the ring detection featureMaking a copy More copying featuresStop Start Example Making 2 copies of a 4-page original document To collate multiple copiesErasing your recorded greeting message Recording your greeting messagePre-recorded greeting message Stop Erase Greeting MICErasing recorded messages Listening to recorded messagesStop Erase Menu Leaving a message for others or yourself Using the answering machine with the cordless handsetRecording your greeting message Listening to recorded messages Operation using the direct commandsLeaving a message for others or yourself Programming for answering machine To change the ring setting in TAM/FAX modeTo set the remote operation ID To change the maximum recording time for incoming messagesAnswering Machine Summary of remote operation Operating from a remote locationRemote operations following voice menu Remote operation using remote commandsProgramming advanced features Programming basic featuresTo cancel programming Base unit programmingBasic features Code #17 Setting the ringer type for outside calls Advanced featuresCode #22 Setting the journal report to print automatically Code #23 Sending documents overseasCode #28 Setting call bar Code #26 Setting the Caller ID list to print automaticallyCode #31 Activating the Distinctive Ring feature Code #34 Setting the quick scanCode #46 Setting friendly reception Code #44 Setting the memory reception alertCode #58 Setting the scan contrast Code #67 Setting the greeting message monitorProgram code and direct command button Direct commands for programming featuresOFF #23 Overseas mode #13 Dialling mode#25 Delayed transmission #76 Connecting toneNo default #80 Set default YESCordless handset programming Cordless handset Sub-menu Default setting Settings menuMaximum Category No.*1Setting memo alarm Memo alarmProgrammable functions Ringer optionsDisplay options Tone optionsOther options Call optionsResetting the cordless handset to its default settings Setting the battery typeBase unit settings Sub-menu Default setting Menu Cordless handset programming using the base unitSetting pause length Setting dialling mode tone/pulse For Australian users onlySetting call restriction Changing the recall lengthChanging the base unit PIN personal identification number Selecting area codes to be deleted automaticallyRegistering a cordless handset to a base unit Operating additional unitsIntercom Cancelling a base unitBetween cordless handsets Between a cordless handset and the base unitFrom a cordless handset to the base unit Transferring calls / Conference callsFrom the base unit to a cordless handset Cordless handset locatorTo establish a conference call, press Copying cordless handset phonebook itemsEstablish an intercom call Walkie-Talkie Changing the Walkie- Talkie modeTurning Walkie-Talkie on Starting Walkie-Talkie conversationsUsing an optional headset Using the belt clipInsert the connector plug into the headset jack firmly To attach the belt clip To remove the belt clipWall template for charger Wall mounting the chargerCharacter entry modes Available character entries for the cordless handsetAlphabetNumericGreek Cyrillic Extended Following are used for both uppercase and lowercase XExtended 1 character tableYExtended 2 character table Cyrillic character tableError messages Base unit display Error messages ReportsCheck Paper Modem ErrorClose Tension Plate Cover OpenRecording Error Polling ErrorSerial Error Transmit ErrorInitial settings When a function does not work, check hereGeneral Returns to standby mode Problem Cause & Solution Ink film runs outProblem Cause & Solution Cordless handset Charging but the batteryFades. Interference from Problem Cause & Solution Static, sound cuts in/outOther electrical units UsedFax receiving Fax sendingCopying Answering machine If a power failure occursHelp Recording paper jams When the recording paper has jammed in the unitBase unit display will show the following Correct Document jams sending When the recording paper was not fed into the unit properlyDo not use paper products, such as paper towels or tissues Recording paper feeder cleaningDocument feeder / scanner glass cleaning Thermal head cleaning Reference lists and reports Base unit only Specifications RF transmission power Approx mW Voice coding Duplex procedureMass Weight Approx g StandardIndex 110 111 Panasonic New Zealand Limited Sales Department Panasonic Australia Pty. LimitedManufacturer Panasonic Communications Malaysia Sdn. Bhd Global web site Copyright PFQX2096ZA CM1004YH0