BT BF900 manual Load the document Press the Redial button. Display shows

If you make a mistake when dialling, press the < button to move the cursor back to the digit you want to change. The selected digit flashes. Enter the new digit. Press the > button to move the cursor forward. Alternatively, delete all the digits shown in the display by pressing the CLEAR/TONE button.

On-hook dialling

You can use hook dialling to monitor the progress of the call via the loudspeaker.

HOOK

START

•Load the document.

•Press the HOOK button. You hear the dial tone.

•Enter the fax number you want. The number is dialled. Display shows the number and

PRESS START.

•Press the START button when you hear the fax tones from the other machine.

Dialling fax numbers from an attached phone

You can use an attached telephone to send a document direct from the document feeder.

START

•Load the document.

•Pick up the telephone handset and dial the fax number you want.

•When you hear the fax tones, press the START button.

Using the BF900

Please note

The telephone must be connected to the line adaptor socket on the BF900 line cord.

•Replace the handset. Your document starts to go through. Display flashes MANUAL TX and the fax number called.

Redialling the last number

PAUSE\

REDIAL START

•Load the document.

•Press the REDIAL button. Display shows

PRESS START.

•Press the START button. The document is scanned into memory and the number is dialled.

One-touch dialling

You can store up to 32 numbers in the one-touch directory. (See page 22 for how to store one-touch numbers.)

A

•Load the document.

•Set the TYPE ORG, RESOLUTION and PHOTO settings if necessary.

•Press the ONE-TOUCHbutton you want. Display shows the number stored.

For example, press once to display the number stored under 05, or press twice to display the number stored under 37.

•The document is scanned and the number is dialled automatically.

16