
Setting up
Setting up follow these steps to get your BF900 ready to use.
When setting up refer to ‘At a glance’ on page 1 for location of sockets and buttons.
Remove the adhesive strips securing the control panel and plain paper cassette.
With the ‘L’ mark to the left and the ‘R’ mark to the right, line up the drum cartridge with the slots on the inside of your BF900, as indicated by the green labels inside the machine, and slide the whole cartridge down into place.
1Insert the drum and toner cartridges
Press the cover release button and open the top of your BF900.
Cover release button
Unpack the drum cartridge.
Caution
Do not touch the green drum with your fingers.
Unpack the toner cartridge.
Hold the cartridge in both hands and shake well, using a rocking motion as illustrated.
6