Major operating controls and their functions
■Front View
y | !0 !1!2!3 | !6 !7 !8 | @2 |
| HDD | SEQUENCE |
|
|
| SEARCH | STOP | PLAY | PAUSE | REC | REC STOP |
| 1 |
| 1 | 2 | 3 | 4 | COPY |
|
|
|
|
q | ERROR |
|
|
|
| SETUP |
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ||
2 |
|
|
|
|
|
|
|
|
|
| |
w | ALARM | MULTI | 5 | 6 | 7 | 8 | REV | FWD |
| SKIP |
|
3 | SCREEN |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ||
e | TIMER |
|
|
|
|
|
|
| – | + |
|
4 |
| 9 | 10/0 | 11 | 12 |
|
|
|
|
| |
|
|
|
|
|
|
|
| ||||
| 5 | ALARM |
|
|
| ESC |
|
|
|
|
|
r | OPERATE | RESET |
|
|
|
| SET |
|
|
|
|
6 |
| 13 | 14 | 15 | 16 |
|
|
| Digital Disk Recorder | ||
|
|
|
|
|
|
|
|
|
| ||
COPY2
Inside the cover
t u i | o | !4 |
qError indicator (ERROR)
Blinks orange when an error that may interfere with the unit’s operation occurs. (e.g. thermal error, cooling fan malfunction, etc.)
wAlarm Indicator (ALARM)
Blinks red when an alarm occurs. The indicator will stop blinking and light red steadily when the alarm is reset. The blinking or lighting indicator will go off when the [ALARM RESET] button is pressed.
eTimer Indicator (TIMER)
Lights orange when the timer recording is set. Blinks while the timer recording is being performed.
rOperate Indicator (OPERATE)
Lights green when the power is turned on.
tHDD Access Indicators (HDD1/HDD2/HDD3/HDD4/ HDD5/HDD6)
Blinks green when the hard disk is accessed respec- tively.
When an error is detected, the indicator will light red.
*The HDD6 indicator is not provided for the
ySequence button (SEQUENCE)
Images from the connected cameras will be displayed sequentially (sequential display) when this button is pressed. To stop the sequential display, press this but- ton again.
uMulti-screen button (MULTI SCREEN)
Images from the connected cameras will be displayed on a
!5 !9@0 @1 @3
16 (CAM1 - CAM16) → 4A (CAM1 - CAM4) → 4B (CAM5 - CAM8) → 4C (CAM9 - CAM12) → 4D (CAM13 - CAM16) → 6A (CAM1 - CAM6) → 6B (CAM7 - CAM12) → 9 (CAM1 - CAM9) → 16 (CAM1 - CAM16)
iAlarm reset button (ALARM RESET)
The unit will be released from the alarm status when this button is pressed.
oCamera selection buttons
Images from the camera selected using these buttons will be displayed.
The button will light orange to indicate the camera channel of which images are currently being recorded. The camera selection buttons (1 - 10/0) can be used to enter numbers when operating the setup menu.
!0Setup button (SETUP)
Press this button to display the setup menu.
!1Search button (SEARCH)
Press this button to display the time & date search win- dow or the list search window. Refer to pages 24 and 25 for further information about the time & date search window and the list search window.
!2Copy button (COPY)
Press this button to display the copy window.
Refer to page 29 for further information about the copy window.
!3Arrows button (CDAB)
Use this button for the following.
•To move the cursor to select an area (camera chan- nel) when displaying images on a
•To move the cursor when operating the setup menu.
When a user is currently logged in the recorder, the indicator on the button will light blue.
11