Rack mounting
Use an
Note:
It is necessary to procure four optional rack mount screws
z Remove the five rubber feet from the bottom of
the recorder using a flathead screwdriver.
x Place the provided rack mounting brackets on both sides of the recorder and tighten with the eight provided screws.
Remove the rubber feet.
Rack mount bracket fixing screw (provided)
Rack mount bracket (provided)
c Install the recorder with the rack mounting brackets in the rack by using four rack mounting screws.
Rack mounting screw: M5 x12 (locally procured)
Important:
•Keep the temperature in the rack below +45 °C {113 °F}.
•Install the recorder in the rack as low as possible, and make a space of 1 unit (44 mm, 1.73") between the recorder and the other mounted appliances.
•Do not block the front side of the rack such as by attaching a door panel, etc.
•It is recommended to install cooling fans or equivalent equipment to keep the temperature in the rack below +30 °C {86 °F}.
41