Panasonic WJ-RT416V manual Configure the alarm recording settings Alarm Rec. Setup

Page 59

w Configure the alarm recording settings [Alarm Rec. Setup]

Configure the settings relating to the alarm recording that starts upon an event occurrence.

Alarm Rec. Setup

Alarm No.

 

 

 

 

 

 

 

 

 

 

 

 

Term

 

00:00

 

24:00

 

Off

Rec. Channel

 

 

 

 

 

 

 

 

 

VMD

 

00:00

 

24:00

 

Off

Rec. Channel

 

 

 

 

Sensitivity

 

 

 

 

 

Area Setup

 

 

 

 

 

Advanced Setup

 

 

 

 

01 SP Fine Full

00:00 24:00 AL-M

01

00:00 24:00 Off

01

10

Set

Set→

All

OK

Cancel

■Alarm No.

"Alarm No." indicates the following according to the event type.

Terminal input: Terminal used for the terminal alarm recording.

VMD: Camera channel

Command alarm reception: Camera channel

Note:

The camera selection buttons (1 - 10/0) are available for the camera channel selection.

■Rec. Quality

■Rec. Frame Rate

These settings can be configured in the same manner as for "Manual Rec. Setup". Refer to page 57 for further infor- mation.

■Term (Alarm Duration)

Determine the alarm action to be taken and the time range when the alarm action is to be taken upon a terminal input or a command alarm reception. The alarm action to be taken can be determined from the following.

AL-M:All the set alarm actions will be taken upon a termi- nal input.

AD-M:Some of the alarm action will be taken upon a termi- nal input.

(Refer to the "Action at an event occurrence (alarm action)" section on page 27.)

Off: No alarm action will be taken.

Default: Alarm Duration 1: 00:00 - 24:00, Off Alarm Duration 2: 00:00 - 24:00, AL-M

■Term (Rec. Channel)

Set the camera channel to be used for the alarm recording upon a terminal input or a command alarm reception.

00 - 16

When "00" is selected, images from all of the camera channel will be recorded.

Default: (Same value set for "Alarm No.")

■VMD (Alarm Duration)

Determine the alarm action to be taken and the time range when the alarm action is to be taken upon a VMD alarm. The alarm action to be taken can be determined from the following.

AL-M, AD-M, Off

Default: 00:00 - 24:00, Off (for both Alarm Duration 1 and 2)

■VMD (Rec. Channel)

The camera channel used for the alarm recording upon a VMD alarm will be displayed.

The displayed camera channel is the same camera channel number as "Alarm No." (camera channel number from which the VMD alarm is detected). Editing is unavailable.

■VMD (Sensitivity)

Set the sensitivity level of the VMD function. 01 (high) - 99 (low)

Default: 10

Note:

When "AL-M" and "AD-M" of 2 different alarm durations are set in the same time range, the alarm action will be taken according to the setting for the alarm duration with "AL-M".

59

Page 58 Page 60
Image 59
Page 58 Page 60
Contents WJ-RT416V For Your Safety Please Read the Following Text CARE- Fully Important Notice for U.S. fileds only Class 1 Laser ProductLimitation of liability Disclaimer of warrantyImportant safety instructions Contents Precautions MPEG-4 Visual patent portfolio license CleaningProduct disposal/transfer Indication labelVarious Recording Functions FeaturesPreface Trademarks and registered trademarks About these operating instructionsFront View Major operating controls and their functions7Play/Pause button PLAY/PAUSE 4Escape button ESC5Set button SET 6Stop button StopRear View Connect the provided power cord to this inlet 7Power cord inlet AC040000PM When displaying images on a 16-split screenExample When displaying images from camera channel Image displayStart up the recorder as follows StartupSystem Setup window will be displayed Adjustment of the clock of the recorderDisplay the setup menu by pressing the Setup button Press the Stop button When playing recorded images, stop playbackShutdown of the recorder To shut down the recorder, do the followingDisplay images from cameras on a multi-screen Available functions when displaying live imagesMonitor live images from the cameras Display images on a single screenSequential display on a 4-split screen Sequential display on a single screenManual recording Timer recordingAlarm recording RecordingFast forward playback/Fast reverse playback Available functions when playing imagesPlayback Frame by frame reverse playback PausingSkip playback Frame by frame forward playbackStart Search and playCamera No Filtering Search and play with multiple search filtersSearched Start/EndSearch result window will be displayed Action at an event occurrence alarm action Alarm functionStarts recording automatically Alarm recording Cancel the alarm actionRecords alarm logs Display the Copy window by pressing the Copy button Copying DuplicateCopy List window will be displayed User Management window will be displayed Log in as a different userLog out Operation restriction differences between the user levels LogDisk Management window will be displayed Maintenance window will be displayedDisk management Check HDD informationHour Meter CapacityUsed Display the Disk Management window Format the HDDFormat only the selected HDD Format all the HDDsSince the replace HDD is unformatted yet, format the HDD Stop power supply to the HDDWhen completing the HDD replacement, press the SET button Disk Management window will be displayed againRestore HDD management information System requirements for a PC Operate the recorder using a PCFunctions and their descriptions When completing the installation, press the SET button InstallationHDD safety mode InstallationHDD addition HDD replacementRack mounting Basic connection ConnectionRS485 cable WV-CA48/50 Connection with RS485 camerasConnection with PS·Data systems When connecting a single unit with a controllerDIP switches Add the recorder to the existing network Connection with a PCConnect the recorder and a PC directly Add the recorder to a broadband WAN Wide Area Network Operation Accessible numberOFF RS485 Camera port Audio IN/ALARM OUT terminalPin No Signal Operation Remark Alarm IN/CONTROL terminal Setup menu chart Setup menuBasic operation of the setup menu Configure the system settings System Setup Default Search Time Auto Adjust TimeDefault Off Summer Time DST Default Off Summer Time DST TableConfigure the common recording settings Common Setup Configure the recording settings Recording SetupTime Per File Advanced SetupDefault 4 Sec Resolution Default FieldConfigure the timer recording settings Timer Rec. Setup Configure the manual recording settings Manual Rec. SetupDefault On Configure the alarm action settings Event SetupAlarm Buzz Default On Alarm SpotConfigure the alarm recording settings Alarm Rec. Setup Alarm Spot Camera No VMD Area Setup Set the VMD areaDefault 030 sec Alarm Duration Alarm Output PortStatus Display Configure the display settings Display SetupDefault All Camera Allocation SetupCompensation TypeProtocol Configure the network settings Network Setup Configure the PS·Data settings PS.Data Setup Configure the RS485 settings RS485 SetupDefault 1 s Camera Number Setup Default None Stop BitDefault 1 bit Retry Timing Alarm DataRestrict the operable functions User Level Setup Logout of the recorder Logout Set the password PasswordRefer to page 31 for how to log out of the recorder Check the Error Log Error Log Maintenance functions MaintenanceCheck the alarm log Alarm Log Following can be checked Current Temperature Highest TemperatureCheck the system information System Information Manage the HDDs Disk ManagementMonitor Reset the current settings to the default Factory DefaultReboot the recorder Reboot System Following information will be displayed for TypeCheck the detailed information Advanced Information User number 1 20, a Auto Login UserTC YYYY-MM-DD Hhmmss Restore Default Settings Access LogFirmware Update OperationWJ-RT416 WV-CU650 Operation using the system controllerFast forward/slow playback Available only when the search window isPlay Stop playbackSymptom Troubleshooting13, 49 58-60 Symptom Function SpecificationsGeneral Input/OutputRecording time length Standard accessoriesPanasonic Sales Company Panasonic System Solutions CompanyFor business users in the European Union Panasonic Canada Inc
Related manuals
Manual 59 pages 63.52 Kb
Top Page Image Contents