Search and play
It is possible to search the desired recorded images and play them. The search and play can be carried out when displaying images on a single screen.
The following is available as the search filter for the search and play.
•Time and date when images had been recorded
•Recording type (Manual recording/Timer recording/Alarm recording)
•Type of the alarm recording (Terminal alarm recording/VMD alarm recording/Command alarm recording)
Start playback by designating the desired time and date of recorded images to be played
It is possible to start playback by designating the desired camera channel and the start time and date of recording.
Screenshot 1
Display the Time & Date Search window by pressing the [SEARCH] button.
Time & Date Search
Camera No. | 05 |
|
|
|
| ||
|
|
| |||||
Start |
| ||||||
[SEARCH]:List Search |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| OK |
|
|
| Cancel |
|
|
Step 1
Move the cursor onto each setup item and set the search filter.
Camera No.
Enter the camera channel number to be played using the camera selection buttons (1 - 10/0).
Start
Enter the start time and date of recording to be played using the camera selection buttons (1 - 10/0).
Time and date that is specified minutes ago from the cur- rent time will be automatically displayed. The difference between the displayed time and the current time varies according to the value selected for "Default Search Time" (☞ page 54).
Step 2
When finishing entering, move the cursor onto "OK" and press the [SET] button.
→Playback of searched recorded images will start.
Refer to page 22 for further information about playback operations.
Note:
When no recorded image found, playback of the next recorded image will automatically start from the begin- ning.
24