Copying Duplicate | Panasonic WJ-RT416V guide

Copying (Duplicate)

It is possible to copy recorded images onto an external recording device (HDD, DVD-R, CD-R, USB memory, etc.) connected to the recorder. It is recommended to make back-up copies on a regular basis for unexpected situations such as malfunction of the HDD.

Important:

•Do not disconnect the cable connecting between the external recording device and the recorder in the process of copy- ing. Otherwise, it may damage both the recorder and the external recording device.

•When copying recorded images using the WJ-RT416V with the internal CD/DVD drive, the disk drive to be used for copy- ing will be determined in the following priority.

1.External recording device connected to the COPY2 port (Front)

2.External recording device connected to the COPY1 port (Rear)

3.Internal CD/DVD drive

(When external recording devices are connected to both the COPY1 port (rear) and the COPY2 port (front), recorded images will be copied only onto the external recording device connected to the COPY2 port.)

• When using an external HDD or a USB memory, format it in FAT32 system in advance.

Screenshot 1

Display the Copy window by pressing the COPY button.

Step 1

Camera No.

Start

End

Copy

Month-Day-Year

10-21-2006 11:30:30

Month-Day-Year

10-22-2006 11:30:30

Search for recorded images to be copied by setting each search filter on the "Copy" window.

Camera No.

Enter the camera channel number to be searched using the camera selection buttons (1 - 10/0).

Start/End

Designate the time period to be searched by entering the start and end time and date.

Filtering		Off


	OK		Cancel

Filtering

Select the recording type and the alarm recording type to be searched using the skip buttons (s d).

Off: Searches without filtering

Manual: Searches for only images recorded manually

Timer: Searches for only images recorded by the timer recording

Alarm: Searches for only images recorded by the alarm recording (Terminal alarm recording/VMD alarm record- ing/command alarm recording)

Terminal: Searches for only images recorded by the termi- nal alarm recording

VMD: Searches for only images recorded by the VMD alarm recording

Com: Searches for only images recorded by the alarm recording triggered by a command alarm reception

Step 2

When determining the filter settings, move the cursor onto "OK" and press the [SET] button.

Note:

When "00" is entered for "Camera No.", all of the camera channels will be searched.