Playback
Recorded images can be played as follows. Recorded images will be played on a single screen.
z
x
Select the desired camera channel by pressing the camera channel selection buttons (1 - 16) or by moving the cursor onto the area respective to the desired camera channel using the arrows button (CDAB) when display- ing images on a
Click the [PLAY] button.
•Recorded images will be displayed on a single screen. When playback starts, the 
icon (playback icon) will be dis- played and the [PLAY] button will light.
•When selecting a
Important:
•Playback of the latest recorded image using the selected camera channel will start. It is impossible to play images currently being recorded.
•When the recording duration of recorded images to be played is too short, it may be impossible to play the recorded images.
•When recorded images are played on this recorder, the recorded images currently being played cannot be played using a PC via a network. Likewise, when recorded images are played using a PC via a network, the recorded images currently being played cannot be played using the recorder.
Note:
When playing recorded images whose image quality and recording rate are low, audio may not be heard properly.
c To stop playback, press the [STOP] button. When displaying recorded images on a
• When the lit [PLAY] button goes off and the playback stops, the 
icon (playback icon) will also disappear.
Available functions when playing images
Fast forward playback/Fast reverse playback
When the [FWD] button is pressed during playback, fast forward playback will start. When the [REV] button is pressed during playback, fast reverse playback will starts. Each time the [FWD] button is pressed, playback speed will change as follows.
SLOW/1FF/2FF/3FF/4FF/5FF/6FF
Each time the [REV] button is pressed, playback speed will change as follows. 1REW/2REW/3REW/4REW/5REW/6REW
When the [PLAY] button is pressed during fast forward playback/fast reverse playback, playback speed will return to the nor- mal playback speed.
Playback speed can be set on the setup menu ("Recording Setup" – "Common Setup" – "Advanced Setup" – "I Frame Interval") (☞ page 56). The current playback speed will be displayed on the screen.
I Frame |
|
|
|
| |
Interval | 1 | 2 | 3 | 4 | |
Playback | |||||
|
|
|
| ||
speed |
|
|
|
| |
SLOW | ⋅1/2 | ⋅1/2 | ⋅1/2 | ⋅1/2 | |
|
|
|
|
| |
1FF, 1REW | ⋅1 | ⋅2 | ⋅3 | ⋅4 | |
|
|
|
|
| |
2FF, 2REW | ⋅2 | ⋅4 | ⋅6 | ⋅8 | |
|
|
|
|
| |
3FF, 3REW | ⋅4 | ⋅8 | ⋅12 | ⋅16 | |
|
|
|
|
| |
4FF, 4REW | ⋅8 | ⋅16 | ⋅24 | ⋅32 | |
|
|
|
|
| |
5FF, 5REW | ⋅16 | ⋅32 | ⋅48 | ⋅64 | |
|
|
|
|
| |
6FF, 6REW | ⋅32 | ⋅64 | ⋅96 | ⋅128 |
The "I Frame Interval" setting is applied only for playback images. The values in the table are approximate playback speed as indications when the playback speed is normal (x1).
22