Panasonic WJ-RT416V Check the system information System Information, Following can be checked

Page 69

e Check the system information [System Information]

System information such as the firmware version, MAC address, etc. can be checked.

System Information

Firmware Version

*.**

MAC Address

AA:BB:CC:DD:EE:FF

Video Format

NTSC

Optional Board

Coax1

Current Temperature

28

degC/82 degF

Highest Temperature

37

degC/98 degF

10-05-2006 10:00:00

Return

The following can be checked.

Firmware Version

MAC Address

Video Format

Optional Board

Information about the coaxial communication board (optional) will be displayed. Coax1, Coax2: 2 of the coaxial communication board are installed.

Coax1: A single coaxial communication board is installed.

--: No coaxial communication board is installed.

Current Temperature

Highest Temperature

The current temperature inside the recorder, the highest temperature ever recorded and its time and date will be displayed.

r Check the current recording settings [Current Recording Settings]

The current recording settings such as the image quality and the frame rate for each recording type (manual recording/timer recording/alarm recording) for each channel, etc. can be checked.

 

Current Recording Settings

 

No.

Title

Manual

Timer

Alarm

 

 

 

 

 

1

Cam1

NQ/Full

NQ/Full

NQ/Full

2

Cam2

NQ/Full

NQ/Full

NQ/Full

3

Cam3

NQ/Full

NQ/Full

NQ/Full

4

Cam4

NQ/Full

NQ/Full

NQ/Full

5

Cam5

NQ/Full

NQ/Full

NQ/Full

6

Cam6

NQ/Full

NQ/Full

NQ/Full

7

Cam7

NQ/Full

NQ/Full

NQ/Full

8

Cam8

NQ/Full

NQ/Full

NQ/Full

 

 

 

 

 

p 1 / 2

Prev

Next

Return

The "Title" setting can be configured with the monitoring software. Refer to the operating instructions of the monitoring software (PDF) on the provided CD-ROM for further information.

t Manage the HDDs [Disk Management]

Format of the built-in HDDs and restore of HDD management information (list information of recorded images) are available. Refer to pages 33 - 37 for further information.

69

Image 69
Contents WJ-RT416V For Your Safety Please Read the Following Text CARE- Fully Important Notice for U.S. fileds only Class 1 Laser ProductLimitation of liability Disclaimer of warrantyImportant safety instructions Contents Precautions Product disposal/transfer CleaningIndication label MPEG-4 Visual patent portfolio licenseFeatures PrefaceVarious Recording Functions Trademarks and registered trademarks About these operating instructionsFront View Major operating controls and their functions5Set button SET 4Escape button ESC6Stop button Stop 7Play/Pause button PLAY/PAUSERear View Connect the provided power cord to this inlet 7Power cord inlet ACExample When displaying images from camera channel When displaying images on a 16-split screenImage display 040000PMStart up the recorder as follows StartupAdjustment of the clock of the recorder Display the setup menu by pressing the Setup buttonSystem Setup window will be displayed Shutdown of the recorder When playing recorded images, stop playbackTo shut down the recorder, do the following Press the Stop buttonMonitor live images from the cameras Available functions when displaying live imagesDisplay images on a single screen Display images from cameras on a multi-screenSequential display on a 4-split screen Sequential display on a single screenAlarm recording Timer recordingRecording Manual recordingAvailable functions when playing images PlaybackFast forward playback/Fast reverse playback Skip playback PausingFrame by frame forward playback Frame by frame reverse playbackSearch and play Camera NoStart Searched Search and play with multiple search filtersStart/End FilteringSearch result window will be displayed Action at an event occurrence alarm action Alarm functionCancel the alarm action Records alarm logsStarts recording automatically Alarm recording Display the Copy window by pressing the Copy button Copying DuplicateCopy List window will be displayed Log in as a different user Log outUser Management window will be displayed Operation restriction differences between the user levels LogDisk management Maintenance window will be displayedCheck HDD information Disk Management window will be displayedCapacity UsedHour Meter Format only the selected HDD Format the HDDFormat all the HDDs Display the Disk Management windowWhen completing the HDD replacement, press the SET button Stop power supply to the HDDDisk Management window will be displayed again Since the replace HDD is unformatted yet, format the HDDRestore HDD management information Operate the recorder using a PC Functions and their descriptionsSystem requirements for a PC HDD safety mode InstallationInstallation When completing the installation, press the SET buttonHDD addition HDD replacementRack mounting Basic connection ConnectionRS485 cable WV-CA48/50 Connection with RS485 camerasConnection with PS·Data systems When connecting a single unit with a controllerDIP switches Connection with a PC Connect the recorder and a PC directlyAdd the recorder to the existing network Add the recorder to a broadband WAN Wide Area Network Operation Accessible numberOFF Audio IN/ALARM OUT terminal Pin No Signal Operation RemarkRS485 Camera port Alarm IN/CONTROL terminal Setup menu chart Setup menuBasic operation of the setup menu Configure the system settings System Setup Default Off Summer Time DST Auto Adjust TimeDefault Off Summer Time DST Table Default Search TimeConfigure the common recording settings Common Setup Configure the recording settings Recording SetupDefault 4 Sec Resolution Advanced SetupDefault Field Time Per FileConfigure the timer recording settings Timer Rec. Setup Configure the manual recording settings Manual Rec. SetupAlarm Buzz Configure the alarm action settings Event SetupDefault On Alarm Spot Default OnConfigure the alarm recording settings Alarm Rec. Setup Default 030 sec Alarm Duration VMD Area Setup Set the VMD areaAlarm Output Port Alarm Spot Camera NoDefault All Configure the display settings Display SetupCamera Allocation Setup Status DisplayType ProtocolCompensation Configure the network settings Network Setup Configure the PS·Data settings PS.Data Setup Configure the RS485 settings RS485 SetupDefault 1 bit Retry Timing Default None Stop BitAlarm Data Default 1 s Camera Number SetupRestrict the operable functions User Level Setup Set the password Password Refer to page 31 for how to log out of the recorderLogout of the recorder Logout Maintenance functions Maintenance Check the alarm log Alarm LogCheck the Error Log Error Log Check the system information System Information Current Temperature Highest TemperatureManage the HDDs Disk Management Following can be checkedReboot the recorder Reboot System Reset the current settings to the default Factory DefaultFollowing information will be displayed for Type MonitorTC YYYY-MM-DD Hhmmss Restore Default Settings User number 1 20, a Auto Login UserAccess Log Check the detailed information Advanced InformationFirmware Update OperationWJ-RT416 WV-CU650 Operation using the system controllerPlay Available only when the search window isStop playback Fast forward/slow playbackSymptom Troubleshooting13, 49 58-60 Symptom General SpecificationsInput/Output FunctionRecording time length Standard accessoriesFor business users in the European Union Panasonic System Solutions CompanyPanasonic Canada Inc Panasonic Sales Company
Related manuals
Manual 59 pages 63.52 Kb