Configure the alarm action settings [Event Setup]
Configure the settings relating to the alarm action that is to be taken at an event occurrence. Refer to page 27 for further information about the event type and the alarm action.
Event Setup
Common Setup Alarm Rec. Setup
q
w
q Configure the common settings for the alarm recording [Common Setup]
Configure the common settings relating to the alarm action that is to be taken when an event (terminal alarm, VMD alarm, com- mand alarm) occurred.
|
| Common Setup | |||||
Alarm | Buzz |
|
| ||||
On |
| ||||||
Alarm | Spot |
| |||||
On |
| ||||||
Pre Alarm Recording |
| ||||||
Off |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| OK |
|
| Cancel |
| |
|
|
|
|
|
|
|
|
■Alarm Buzz
Select "On" or "Off" to determine whether or not to sound the buzzer at an event occurrence. The selected duration for "Alarm Duration" of "Alarm Rec. Setup" (☞ page 59) will be applied as the sounding duration of the buzzer.
On: Sound the buzzer
Off: Do not sound the buzzer
Default: On
■Alarm Spot
Select "On" or "Off" to determine whether or not to display images from the camera that is selected for "Alarm Spot Camera No." of "Alarm Rec. Setup (Advance)" (☞ page 59) on a single screen at an event occurrence.
On: Display images from the selected camera.
Off: Do not display images from the selected camera.
Default: On
Note:
The screen that was displayed immediately before an event resumes after the event is finished.
■Pre Alarm Recording
Select "On" or "Off" to determine whether or not to start recording from the specified seconds before an event occurrence
On: Start the
Off: Do not start the
Default: Off
Notes:
•Maximum recording duration of the
•I Frame Interval
•Capture Resolution
•Rec. Quality
•Rec. Frame Rate
•Audio is not recorded during
58