Panasonic WJ-RT416 Sequential display on a single screen, Sequential display on a 4-split screen

Page 20

Display images from the cameras sequentially (sequential display)

It is possible to sequentially display images from cameras automatically. Images from the cameras will be displayed sequen- tially according to the settings configured in advance.

The sequential display can be carried out on a single screen or a 4-split screen.

Sequential display on a single screen

z Make sure that images are displayed not on a 4-split screen, and then press the [SEQUENCE] button.

•The sequential display will start and the icon (sequential display icon) will be displayed.

•To stop the sequential display, press the [SEQUENCE] button again.

Sequential display on a 4-split screen

z Make sure that images are displayed on a 4-split screen, and then press the [SEQUENCE] button.

•The sequential display will start and the icon (sequential display icon) will be displayed.

•To stop the sequential display, press the [SEQUENCE] button again.

Notes:

•The dwell time (interval of switching from a camera channel to the next camera channel) can be configured on the setup menu ("Display Setup" – "Sequence Dwell") (☞ page 61).

•It Is impossible to carry out the sequential display during playback.

•The sequence step that is unavailable to display (such as when no video signal) will be skipped.

20

Image 20

Contents WJ-RT416V For Your Safety Please Read the Following Text CARE- Fully Class 1 Laser Product Important Notice for U.S. fileds onlyDisclaimer of warranty Limitation of liabilityImportant safety instructions Contents Precautions Cleaning Product disposal/transferIndication label MPEG-4 Visual patent portfolio licenseVarious Recording Functions FeaturesPreface About these operating instructions Trademarks and registered trademarksMajor operating controls and their functions Front View4Escape button ESC 5Set button SET6Stop button Stop 7Play/Pause button PLAY/PAUSERear View 7Power cord inlet AC Connect the provided power cord to this inletWhen displaying images on a 16-split screen Example When displaying images from camera channelImage display 040000PMStartup Start up the recorder as followsSystem Setup window will be displayed Adjustment of the clock of the recorderDisplay the setup menu by pressing the Setup button When playing recorded images, stop playback Shutdown of the recorderTo shut down the recorder, do the following Press the Stop buttonAvailable functions when displaying live images Monitor live images from the camerasDisplay images on a single screen Display images from cameras on a multi-screenSequential display on a single screen Sequential display on a 4-split screenTimer recording Alarm recordingRecording Manual recordingFast forward playback/Fast reverse playback Available functions when playing imagesPlayback Pausing Skip playbackFrame by frame forward playback Frame by frame reverse playbackStart Search and playCamera No Search and play with multiple search filters SearchedStart/End FilteringSearch result window will be displayed Alarm function Action at an event occurrence alarm actionStarts recording automatically Alarm recording Cancel the alarm actionRecords alarm logs Copying Duplicate Display the Copy window by pressing the Copy buttonCopy List window will be displayed User Management window will be displayed Log in as a different userLog out Log Operation restriction differences between the user levelsMaintenance window will be displayed Disk managementCheck HDD information Disk Management window will be displayedHour Meter CapacityUsed Format the HDD Format only the selected HDDFormat all the HDDs Display the Disk Management windowStop power supply to the HDD When completing the HDD replacement, press the SET buttonDisk Management window will be displayed again Since the replace HDD is unformatted yet, format the HDDRestore HDD management information System requirements for a PC Operate the recorder using a PCFunctions and their descriptions Installation HDD safety modeInstallation When completing the installation, press the SET buttonHDD replacement HDD additionRack mounting Connection Basic connectionConnection with RS485 cameras RS485 cable WV-CA48/50When connecting a single unit with a controller Connection with PS·Data systemsDIP switches Add the recorder to the existing network Connection with a PCConnect the recorder and a PC directly Operation Accessible number Add the recorder to a broadband WAN Wide Area NetworkOFF RS485 Camera port Audio IN/ALARM OUT terminalPin No Signal Operation Remark Alarm IN/CONTROL terminal Setup menu Setup menu chartBasic operation of the setup menu Configure the system settings System Setup Auto Adjust Time Default Off Summer Time DSTDefault Off Summer Time DST Table Default Search TimeConfigure the recording settings Recording Setup Configure the common recording settings Common SetupAdvanced Setup Default 4 Sec ResolutionDefault Field Time Per FileConfigure the manual recording settings Manual Rec. Setup Configure the timer recording settings Timer Rec. SetupConfigure the alarm action settings Event Setup Alarm BuzzDefault On Alarm Spot Default OnConfigure the alarm recording settings Alarm Rec. Setup VMD Area Setup Set the VMD area Default 030 sec Alarm DurationAlarm Output Port Alarm Spot Camera NoConfigure the display settings Display Setup Default AllCamera Allocation Setup Status DisplayCompensation TypeProtocol Configure the network settings Network Setup Configure the RS485 settings RS485 Setup Configure the PS·Data settings PS.Data SetupDefault None Stop Bit Default 1 bit Retry TimingAlarm Data Default 1 s Camera Number SetupRestrict the operable functions User Level Setup Logout of the recorder Logout Set the password PasswordRefer to page 31 for how to log out of the recorder Check the Error Log Error Log Maintenance functions MaintenanceCheck the alarm log Alarm Log Current Temperature Highest Temperature Check the system information System InformationManage the HDDs Disk Management Following can be checkedReset the current settings to the default Factory Default Reboot the recorder Reboot SystemFollowing information will be displayed for Type MonitorUser number 1 20, a Auto Login User TC YYYY-MM-DD Hhmmss Restore Default SettingsAccess Log Check the detailed information Advanced InformationFirmware Update Operation using the system controller OperationWJ-RT416 WV-CU650Available only when the search window is PlayStop playback Fast forward/slow playbackTroubleshooting Symptom13, 49 58-60 Symptom Specifications GeneralInput/Output FunctionStandard accessories Recording time lengthPanasonic System Solutions Company For business users in the European UnionPanasonic Canada Inc Panasonic Sales Company

Related manuals

Manual 59 pages 63.52 Kb