w Configure the manual recording settings [Manual Rec. Setup]
Configure the settings for manual recording that starts recording when the [REC] button is pressed.
Manual Rec. Setup
Camera No. |
| 01▲ |
|
|
| ||||
Rec. Quality |
|
|
|
| |||||
| SP Fine |
|
| ||||||
Rec. Frame Rate |
|
|
| ||||||
| Full |
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| All |
|
| OK |
|
| Cancel |
| |
■Camera No.
Select a camera channel to be used for manual recording.
Note:
The camera selection buttons (1 - 10/0) are available for the camera channel selection.
■Rec. Quality
Select an image quality for recorded images from the fol- lowing.
SP Fine: Highest quality
Fine: High quality
Normal: Standard quality
Extended: Low quality
Default: SP Fine
■Rec. Frame Rate
Select a recording frame rate from the following. Full, 1/2F, 1/4F, 1/8F, 1/16F
(When "Full" is selected, recording frame rate will be 30 frames/sec for NTSC model and 25 frames/sec for PAL model.)
Default: Full
Note:
When the [SET] button is pressed after moving the cur- sor onto "All", the same settings for "Rec. Quality" and "Rec. Frame Rate" will be applied to all of the camera channels.
e Configure the timer recording settings [Timer Rec. Setup]
Designate a day of the week and time when the timer recording is to be started (timer recording schedule).
| Timer Rec. Setup | |
|
|
|
Camera No. |
| 01 |
SP Fine 
Full
SUN | 00: 00 |
|
| 24: 00 |
| Off |
| |
MON |
|
|
|
|
|
|
| |
00: 00 |
|
| 24: 00 |
| Off |
| ||
TUE |
|
|
|
|
|
|
| |
00: 00 |
|
| 24: 00 |
| Off |
| ||
WED |
|
|
|
| ||||
00: 00 |
|
| 24: 00 |
| Off |
| ||
THU |
|
|
|
| ||||
00: 00 |
|
| 24: 00 |
| Off |
| ||
FRI |
|
|
|
| ||||
00: 00 |
|
| 24: 00 |
| Off |
| ||
SAT |
|
|
|
| ||||
00: 00 |
|
| 24: 00 |
| Off |
| ||
DAILY |
|
|
|
| ||||
00: 00 |
|
| 24: 00 |
| Off |
| ||
|
|
|
|
|
|
|
|
|
|
| All |
|
|
|
| OK | |
00:00 
24: 00 
Off
00:00 
24: 00 
Off
00:00 
24: 00 
Off
00:00 
24: 00 
Off
00:00 
24: 00 
Off
00:00 
24: 00 
Off
00:00 
24: 00 
Off
00:00 
24: 00 
Off Cancel
■Camera No., Rec. Quality, Rec. Frame Rate
These settings can be configured in the same manner as for "Manual Rec. Setup". Refer to the "Manual Rec. Setup" section.
■Recording time range
Set the start time and end time for the desired day of the week, and then select "On".
Up to 2 time ranges can be set as the timer recording schedule.
To set the same time range for every day of the week, enter the start and end time for "DAILY".
When "On" and "Off" of 2 different schedules are set in the same time range, the timer recording will be carried out according to the schedule for which "On" is selected.
Note:
When the [SET] button is pressed after moving the cur- sor onto "All", the same settings for "Rec. Quality", "Rec. Frame Rate" and "Recording time range" will be applied to all of the camera channels.
57