Panasonic WJ-RT416V manual Cleaning, Product disposal/transfer, Indication label

Page 8

Prevent condensation from forming on the surface of the hard disk.

If this happens, do not turn on the power of the recorder and leave the recorder for around 2 hours.

Wait until the dew evaporates in any of the following cases:

The recorder is placed in an extremely humid place.

The recorder is placed in a room where a heater has just been turned on.

The recorder is moved from an air-conditioned room to a humid and high-temperature room.

When the unit has not been used for a certain period, turn on the power of the unit (approximately once a week), and perform recording/playback to prevent interferences with functions.

Avoid placing receptacles that contain liquids such as water near the unit.

If liquid spills onto the unit, it may cause fire or an electric shock.

Cleaning

Turn the power off when cleaning the unit. Otherwise it may cause injuries.

Do not use strong or abrasive detergents when cleaning the unit body.

Use a dry cloth to clean the unit when it is dirty.

When the dirt is hard to remove, use a mild detergent and wipe gently.

When using a chemical cloth for cleaning, read the caution provided with the chemical cloth product.

Product disposal/transfer

Images saved on the hard disk drives may lead to personal information leakage. When it is necessary to dispose or give this product to someone, even when for repair, make sure that there is no data on the hard disk drives.

Indication label

Refer to the indication label placed on the surface of the unit as to the indications of equipment classification and power source, etc.

Just in case, make a note of your settings and save them. They are helpful when you are required to change the sys- tem configuration, or when unexpected trouble or failure occurs.

Distributing, copying, disassembling, reverse compiling, reverse engineering, and also exporting in violation of export laws of the software provided with this product, is expressly prohibited.

MPEG-4 Visual patent portfolio license

This product is licensed under the MPEG-4 Visual patent portfolio license for the personal and non-commercial use of a consumer for (i) encoding video in compliance with the MPEG-4 Visual Standard ("MPEG-4 Video") and/or (ii) decoding MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed by MPEG LA to provide MPEG-4 Video. No license is granted or shall be implied for any other use. Additional information including that relating to promotional, internal and commercial uses and licensing may be obtained from MPEG LA, LLC.

See http://www.mpegla.com.

8

Image 8
Contents WJ-RT416V For Your Safety Please Read the Following Text CARE- Fully Class 1 Laser Product Important Notice for U.S. fileds onlyDisclaimer of warranty Limitation of liabilityImportant safety instructions Contents Precautions Cleaning Product disposal/transferIndication label MPEG-4 Visual patent portfolio licenseVarious Recording Functions FeaturesPreface About these operating instructions Trademarks and registered trademarksMajor operating controls and their functions Front View4Escape button ESC 5Set button SET6Stop button Stop 7Play/Pause button PLAY/PAUSERear View 7Power cord inlet AC Connect the provided power cord to this inletWhen displaying images on a 16-split screen Example When displaying images from camera channelImage display 040000PMStartup Start up the recorder as followsSystem Setup window will be displayed Adjustment of the clock of the recorderDisplay the setup menu by pressing the Setup button When playing recorded images, stop playback Shutdown of the recorderTo shut down the recorder, do the following Press the Stop buttonAvailable functions when displaying live images Monitor live images from the camerasDisplay images on a single screen Display images from cameras on a multi-screenSequential display on a single screen Sequential display on a 4-split screenTimer recording Alarm recordingRecording Manual recordingFast forward playback/Fast reverse playback Available functions when playing imagesPlayback Pausing Skip playbackFrame by frame forward playback Frame by frame reverse playbackStart Search and playCamera No Search and play with multiple search filters SearchedStart/End FilteringSearch result window will be displayed Alarm function Action at an event occurrence alarm actionStarts recording automatically Alarm recording Cancel the alarm actionRecords alarm logs Copying Duplicate Display the Copy window by pressing the Copy buttonCopy List window will be displayed User Management window will be displayed Log in as a different userLog out Log Operation restriction differences between the user levelsMaintenance window will be displayed Disk managementCheck HDD information Disk Management window will be displayedHour Meter CapacityUsed Format the HDD Format only the selected HDDFormat all the HDDs Display the Disk Management windowStop power supply to the HDD When completing the HDD replacement, press the SET buttonDisk Management window will be displayed again Since the replace HDD is unformatted yet, format the HDDRestore HDD management information System requirements for a PC Operate the recorder using a PCFunctions and their descriptions Installation HDD safety modeInstallation When completing the installation, press the SET buttonHDD replacement HDD additionRack mounting Connection Basic connectionConnection with RS485 cameras RS485 cable WV-CA48/50When connecting a single unit with a controller Connection with PS·Data systemsDIP switches Add the recorder to the existing network Connection with a PCConnect the recorder and a PC directly Operation Accessible number Add the recorder to a broadband WAN Wide Area NetworkOFF RS485 Camera port Audio IN/ALARM OUT terminalPin No Signal Operation Remark Alarm IN/CONTROL terminal Setup menu Setup menu chartBasic operation of the setup menu Configure the system settings System Setup Auto Adjust Time Default Off Summer Time DSTDefault Off Summer Time DST Table Default Search TimeConfigure the recording settings Recording Setup Configure the common recording settings Common SetupAdvanced Setup Default 4 Sec ResolutionDefault Field Time Per FileConfigure the manual recording settings Manual Rec. Setup Configure the timer recording settings Timer Rec. SetupConfigure the alarm action settings Event Setup Alarm BuzzDefault On Alarm Spot Default OnConfigure the alarm recording settings Alarm Rec. Setup VMD Area Setup Set the VMD area Default 030 sec Alarm DurationAlarm Output Port Alarm Spot Camera NoConfigure the display settings Display Setup Default AllCamera Allocation Setup Status DisplayCompensation TypeProtocol Configure the network settings Network Setup Configure the RS485 settings RS485 Setup Configure the PS·Data settings PS.Data SetupDefault None Stop Bit Default 1 bit Retry TimingAlarm Data Default 1 s Camera Number SetupRestrict the operable functions User Level Setup Logout of the recorder Logout Set the password PasswordRefer to page 31 for how to log out of the recorder Check the Error Log Error Log Maintenance functions MaintenanceCheck the alarm log Alarm Log Current Temperature Highest Temperature Check the system information System InformationManage the HDDs Disk Management Following can be checkedReset the current settings to the default Factory Default Reboot the recorder Reboot SystemFollowing information will be displayed for Type MonitorUser number 1 20, a Auto Login User TC YYYY-MM-DD Hhmmss Restore Default SettingsAccess Log Check the detailed information Advanced InformationFirmware Update Operation using the system controller OperationWJ-RT416 WV-CU650Available only when the search window is PlayStop playback Fast forward/slow playbackTroubleshooting Symptom13, 49 58-60 Symptom Specifications GeneralInput/Output FunctionStandard accessories Recording time lengthPanasonic System Solutions Company For business users in the European UnionPanasonic Canada Inc Panasonic Sales Company
Related manuals
Manual 59 pages 63.52 Kb