Channel selection
This section describes how you select analogue and digital TV channels with your receiver and how you can set the required volume.
This description of the functions assumes that the receiver has been connected correctly.
If you wish to connect the receiver yourself, please read the section "Connection and
Selecting a TV channel
Reception status – digital
The following information describes how to select digital reception of other channels and shows what the
After switching on the receiver, simply press the oubuttons in order to select other TV channels in their ascending or descending order in the channel memory.
Every time you press the button, an
By pressing the Obutton, you can leave this information box permanently
displayed or switch it off by pressing
the
button once again.
You will receive the "channel scrambled" message for scrambled channels.
A further option of selecting a different channel is to press the i button. The TV channel list is now displayed. In the left column it will provide information relating to the received satellites, the transponder and its transmission frequency, the polarization, the symbol rate and the scrambling of digital channels. The right side shows the channel number, the channel broadcaster and the type of reception signal (analogue/digital).
By pressing the oubuttons you jump to the next channel and by pressing
the
Confirm your selection by pressing the
Obutton.
Press the Lbutton to exit the channel list and remain in the channel already set.
If you have now selected an analogue channel, as confirmation, the plain white display for this type of transmission will appear (see below).
18