Kathrein UFD 545 manual Mod.typ, Mod.Ch, OSD colour, OSD-Trans

Page 35

Setting System Parameters

Mod.typ

Here you can set the PAL variant corresponding to your TV set.

Refer to the operating manual of your TV set!

The factory setting is PAL-G.

Mod.Ch

In this position you can set the "transmit channel", on which your TV set is to receive the receiver signal when it is connected to the receiver by means of a coaxial cable.

In the event of disturbances caused by terrestrial stations, set this channel, while observing the TV screen, such that the receiver signal is reproduced without disturbances. Rule of thumb: A spacing of at least one channel should be maintained between the interference channel and receiver channel.

The factory setting is channel 38 UHF.

OSD colour

Use the -+buttons to select the background colour of the on-screen displays.

Confirm by pressing Ltwice

OSD-Trans

Use the -+buttons to select the transparency of the background colour.

Confirm by pressing Ltwice

35

Image 35

Contents DVB Satellite Receiver Page Important information ForewordContents Timer Settings Sound Settings Glossary, Abbreviations Glossary of Technical Terms Safety Information Mains voltage Setting-up locationVentilation Moisture, sunlight, heatRear view Controls, Indicators, Displays and ConnectionsFront view Channel Remote control function buttonsReceiver on the command set Switching over between Remote Control Command SetsAlphanumeric entries Menu conceptButton functions Language selection OSD Sat-IF connection Presetting of the receiving systemConnection and Startup To connect the receiverTV and video recorder connection Inserting batteries in the remote controlLNB supply voltage Modulator connectionFirst steps Switching on for the First TimeFactory setting of the receiver Important on-screen displays OSD On-Screen DisplaysReception status digital Channel selectionSelecting a TV channel Reception status analogue Switching over to radio channelSelecting a radio channel by number entry Timer Settings Mute Sound SettingsSetting the volume Stereo and two-channel sound reproductionFavourite channels Channel Lists TV/radioSelecting TV and radio channels last received To delete a channel To sort the channelsTo add a channel Analogue channel lists To add an analogue channelAdding/Removing Satellites To set up satellitesTo remove satellites To enter a satellite nameCurrent Channel Overview This function cannot be selected in analogue modeEntering a password PasswordFactory setting Parental control Operation in exceptional cases Operation from the Front PanelParental control Setting System ParametersLocal time/timer System parametersPicture format Timer menuSummer time TV typeOSD-Trans Mod.typMod.Ch OSD colourLNB configuration Installation MenuChanging the oscillator frequency Satellite scan Antenna settingsScan completed Press OK button TP setup/scanAnalogue transponder KHz signal DiSEqC UFO setupTone burst Preprogramming is not deleted under Reset Video menu Analogue SettingsDecoder HDP modeAudio mode Audio menuDe-emphasis Frequency left/rightBandwidth Playback Video Recorder ConnectionRecording Modulator reception Analogue Decoder ConnectionTransferring operating software Data Transfer from Receiver to ReceiverPreparation Transferring channel listTechnical Reference Technical featuresHF features Technical dataScart socket assignments AccessoriesConnection arrangement Connection examplesAnalog DVB Glossary, AbbreviationsDiSEqC Glossary of Technical TermsSymbol rate DiSEqC menu ServiceSatellite DNR IndexIndex Page Page Page Page 998.6252/0800/ZWT/PF Subject to technical modifications