Kathrein UFD 545 manual Timer Settings

Timer Settings

You can use the timer for recording a programme with a video recorder on time. Seven timers are available which you can set to different channels as well as start and end times.

To access the timer setting, press Mto enter the main channel menu, uo

to go to system parameters, followed by Oand uoto local time / timer

and O. You now see the display shown below.

Press the oubuttons to move the cursor to the timer you require and confirm

it by pressing O. Press Lto exit the timer again.

Incorrect time settings will be rejected.

You can select and set

∙the channel type, TV or radio,

∙the channel location number with channel name,

∙the start time (date, month, year, hour, minute)

∙the stop time and

∙the timer status (inactive/once/daily/weekly)

for seven timers. You must enter leading zeros for the time settings.

Use the -+and the number buttons to make the required setting.

The current time that you must re-enter appears under the start time. If no other setting is entered, the end time will be set automatically to the same date and one hour after the start time.

Finally confirm the settings by pressing Mor Lthree times.

21