Kathrein UFD 545 Current Channel Overview, This function cannot be selected in analogue mode

Page 29

Current Channel Overview

This function cannot be selected in analogue mode!

The zbutton symbolizes the channel overview. By pressing this button an overview will be displayed indicating the channels being transmitted by the currently received transponder together with the time and duration (see on-screen display) provided these data are transmitted together with the Electronic Programme Guide (EPG), e.g. ARD and ZDF. An abbreviation of the channel title is indicated in the column on the right and in more detailed form in the two bottom

lines. In the column on the left, you can

use the oubuttons to set the cursor on a channel that is to be selected

by pressing the Obutton. Press Lto switch off the on-screen display.

By pressing the -+buttons you can shift the time scale so that you can view the further progression of the programme in time.

29

Image 29
Contents DVB Satellite Receiver Page Important information ForewordContents Timer Settings Sound Settings Glossary, Abbreviations Glossary of Technical Terms Safety Information Ventilation Setting-up locationMoisture, sunlight, heat Mains voltageRear view Controls, Indicators, Displays and ConnectionsFront view Channel Remote control function buttonsReceiver on the command set Switching over between Remote Control Command SetsAlphanumeric entries Menu conceptButton functions Language selection OSD Connection and Startup Presetting of the receiving systemTo connect the receiver Sat-IF connectionLNB supply voltage Inserting batteries in the remote controlModulator connection TV and video recorder connectionFirst steps Switching on for the First TimeFactory setting of the receiver Important on-screen displays OSD On-Screen DisplaysReception status digital Channel selectionSelecting a TV channel Reception status analogue Switching over to radio channelSelecting a radio channel by number entry Timer Settings Setting the volume Sound SettingsStereo and two-channel sound reproduction MuteFavourite channels Channel Lists TV/radioSelecting TV and radio channels last received To delete a channel To sort the channelsTo add a channel Analogue channel lists To add an analogue channelAdding/Removing Satellites To set up satellitesTo remove satellites To enter a satellite nameCurrent Channel Overview This function cannot be selected in analogue modeEntering a password PasswordFactory setting Parental control Operation in exceptional cases Operation from the Front PanelLocal time/timer Setting System ParametersSystem parameters Parental controlSummer time Timer menuTV type Picture formatMod.Ch Mod.typOSD colour OSD-TransLNB configuration Installation MenuChanging the oscillator frequency Satellite scan Antenna settingsScan completed Press OK button TP setup/scanAnalogue transponder KHz signal DiSEqC UFO setupTone burst Preprogramming is not deleted under Reset Video menu Analogue SettingsAudio mode HDP modeAudio menu DecoderDe-emphasis Frequency left/rightBandwidth Playback Video Recorder ConnectionRecording Modulator reception Analogue Decoder ConnectionPreparation Data Transfer from Receiver to ReceiverTransferring channel list Transferring operating softwareTechnical Reference Technical featuresHF features Technical dataScart socket assignments AccessoriesConnection arrangement Connection examplesAnalog DVB Glossary, AbbreviationsDiSEqC Glossary of Technical TermsSymbol rate DiSEqC menu ServiceSatellite DNR IndexIndex Page Page Page Page 998.6252/0800/ZWT/PF Subject to technical modifications