Kathrein UFD 545 manual Foreword, Important information

Page 3

Foreword

Dear customer,

This User's Guide is designed to help you to use the extensive functions of your new satellite receiver most effectively.

We have made every effort to make the instructions as clear and understandable as possible and to keep them as short as necessary. We have added a small glossary of terms at the end of the User's Guide to facilitate understanding of certain technical expressions that do not lend themselves to translation. And to make sure you find what you are looking for, we have also included an index at the back.

We wish you the very best reception and great pleasure with your new DVB satellite receiver.

Your

KATHREIN Team

Should you, contrary to all expectations, experience problems with your receiver, please contact your dealer or our Hotline.

Tel: #49 (0)8031/18 47 00

Fax: #49 (0)8031/18 46 76

Important information

The channel allocations of the satellites and transponders are subject to frequent change. Consequently, in such cases, it may be necessary to readjust the channel settings even though the channels are preset at the factory corresponding to the latest channel allocations. You can obtain the information necessary for resetting the channels from SAT 1 video text, the Internet or corresponding TV and satellite magazines.

3

Image 3
Contents DVB Satellite Receiver Page Important information ForewordContents Timer Settings Sound Settings Glossary, Abbreviations Glossary of Technical Terms Safety Information Mains voltage Setting-up locationVentilation Moisture, sunlight, heatControls, Indicators, Displays and Connections Front viewRear view Channel Remote control function buttonsReceiver on the command set Switching over between Remote Control Command SetsMenu concept Button functionsAlphanumeric entries Language selection OSD Sat-IF connection Presetting of the receiving systemConnection and Startup To connect the receiverTV and video recorder connection Inserting batteries in the remote controlLNB supply voltage Modulator connectionSwitching on for the First Time Factory setting of the receiverFirst steps Important on-screen displays OSD On-Screen DisplaysChannel selection Selecting a TV channelReception status digital Reception status analogue Switching over to radio channelSelecting a radio channel by number entry Timer Settings Mute Sound SettingsSetting the volume Stereo and two-channel sound reproductionChannel Lists TV/radio Selecting TV and radio channels last receivedFavourite channels To delete a channel To sort the channelsTo add a channel Analogue channel lists To add an analogue channelAdding/Removing Satellites To set up satellitesTo remove satellites To enter a satellite nameCurrent Channel Overview This function cannot be selected in analogue modePassword Factory settingEntering a password Parental control Operation in exceptional cases Operation from the Front PanelParental control Setting System ParametersLocal time/timer System parametersPicture format Timer menuSummer time TV typeOSD-Trans Mod.typMod.Ch OSD colourLNB configuration Installation MenuChanging the oscillator frequency Satellite scan Antenna settingsScan completed Press OK button TP setup/scanAnalogue transponder KHz signal DiSEqC UFO setupTone burst Preprogramming is not deleted under Reset Video menu Analogue SettingsDecoder HDP modeAudio mode Audio menuFrequency left/right BandwidthDe-emphasis Video Recorder Connection RecordingPlayback Modulator reception Analogue Decoder ConnectionTransferring operating software Data Transfer from Receiver to ReceiverPreparation Transferring channel listTechnical Reference Technical featuresHF features Technical dataScart socket assignments AccessoriesConnection arrangement Connection examplesAnalog DVB Glossary, AbbreviationsDiSEqC Glossary of Technical TermsSymbol rate Service SatelliteDiSEqC menu DNR IndexIndex Page Page Page Page 998.6252/0800/ZWT/PF Subject to technical modifications