Kathrein UFD 545 manual Switching over to radio channel, Reception status analogue

Page 19

Channel selection

Reception status - analogue

You can, of course, select other channels by pressing the oubuttons while receiving an analogue channel. The selection of analogue channels is indicated by the information bar being displayed briefly in white, e.g.:

TV 59

DER KINDERKA

STEREO

By pressing the Obutton, you can see the selected channel in the same form.

Press the ibutton to see the channel list indicated in white in the display. It shows the memory location, the channel name and the reception type "A" or "D" (analogue or digital). By pressing the

oubuttons and the -+buttons you can jump to the next page in the same

way as with the digital channels.

Press the Obutton to select the required channel and press the Lbutton to exit the channel list and remain in the channel already selected.

If you have now selected a digital channel, as a confirmation, the coloured display for this type of transmission will appear.

Selecting a TV channel by number entry

	You can select a different TV channel during a current TV channel by entering the
	channel location number. Use the number buttons 1to 0 for the purpose of
	entering the channel location number.
Example	You wish to select the TV channel "DSF". This channel is stored under the channel
	location number 015. (The order of TV channels is defined in the channel memory
	and therefore only serves as an example here.)
	To select this channel, press the numbers 1and 5 one after the other. The
	receiver waits for about 3 seconds for entry of the next number.
	Follow the same procedure for all other channels – i.e. also channels with three-
	digit channel location numbers. You do not have to enter leading zeros.

Switching over to radio channel

You can switch over from a TV channel to a radio channel.

Press the Rbutton on the remote control for this purpose.

The receiver switches over to the channel location of the radio channels last set.

You can return to the TV channel by pressing the same button or T. The corresponding display relating to the received channel, i.e. as when selecting the TV channels, appears on the screen. The LCD display shows a small "r" together with the channel location number.

The screen will be blanked out after several seconds.

19

Image 19

Contents DVB Satellite Receiver Page Important information ForewordContents Timer Settings Sound Settings Glossary, Abbreviations Glossary of Technical Terms Safety Information Mains voltage Setting-up locationVentilation Moisture, sunlight, heatFront view Controls, Indicators, Displays and ConnectionsRear view Channel Remote control function buttonsReceiver on the command set Switching over between Remote Control Command SetsButton functions Menu conceptAlphanumeric entries Language selection OSD Sat-IF connection Presetting of the receiving systemConnection and Startup To connect the receiverTV and video recorder connection Inserting batteries in the remote controlLNB supply voltage Modulator connectionFactory setting of the receiver Switching on for the First TimeFirst steps Important on-screen displays OSD On-Screen DisplaysSelecting a TV channel Channel selectionReception status digital Reception status analogue Switching over to radio channelSelecting a radio channel by number entry Timer Settings Mute Sound SettingsSetting the volume Stereo and two-channel sound reproductionSelecting TV and radio channels last received Channel Lists TV/radioFavourite channels To delete a channel To sort the channelsTo add a channel Analogue channel lists To add an analogue channelAdding/Removing Satellites To set up satellitesTo remove satellites To enter a satellite nameCurrent Channel Overview This function cannot be selected in analogue modeFactory setting PasswordEntering a password Parental control Operation in exceptional cases Operation from the Front PanelParental control Setting System ParametersLocal time/timer System parametersPicture format Timer menuSummer time TV typeOSD-Trans Mod.typMod.Ch OSD colourLNB configuration Installation MenuChanging the oscillator frequency Satellite scan Antenna settingsScan completed Press OK button TP setup/scanAnalogue transponder KHz signal DiSEqC UFO setupTone burst Preprogramming is not deleted under Reset Video menu Analogue SettingsDecoder HDP modeAudio mode Audio menuBandwidth Frequency left/rightDe-emphasis Recording Video Recorder ConnectionPlayback Modulator reception Analogue Decoder ConnectionTransferring operating software Data Transfer from Receiver to ReceiverPreparation Transferring channel listTechnical Reference Technical featuresHF features Technical dataScart socket assignments AccessoriesConnection arrangement Connection examplesAnalog DVB Glossary, AbbreviationsDiSEqC Glossary of Technical TermsSymbol rate Satellite ServiceDiSEqC menu DNR IndexIndex Page Page Page Page 998.6252/0800/ZWT/PF Subject to technical modifications