Kathrein UFD 545 manual Safety Information

Page 7

Safety Information

Important information on operation

In the following section you will find important information on operation, the place of installation and connection of the receiver.

Please read this information carefully before you start up your receiver.

Longer periods of absence/thunderstorms

Always switch off the receiver with the power switch at the front left in the event of longer periods of absence and during a thunderstorm. This also applies to any other devices that may be connected to the receiver.

If timer programming is set make sure the receiver is switched on in good time before the set recording time.

Mains lead

Take particular care to ensure that the power supply cable is not damaged. Never operate the device with a defective mains lead.

Cleaning

Disconnect the receiver from the power supply before you clean it. Use a soft dry cloth for this purpose. Only clean the surface of the casing.

Never open the casing. Contact with parts on the inside of the receiver poses a risk of electric shock.

Playing children

Make sure that children do not insert objects into the ventilation slots. This is a source of danger and fatal injury by electric shock, and may cause a short-circuit.

Repair

Only have qualified service personnel carry out repairs or adjustments to your receiver. Unauthorized opening up of the receiver and attempts at repair will invalidate the guarantee.

Unauthorized tampering with the device can jeopardize the electrical safety of the receiver.

The manufacturer shall not be liable for accidents to the user as the result of the receiver being opened up.

Connections

Incorrect connection can lead to problems in operation or cause defects in the device.

7

Image 7
Contents DVB Satellite Receiver Page Important information Foreword Contents Timer Settings Sound Settings Glossary, Abbreviations Glossary of Technical Terms Safety Information Mains voltage Setting-up locationVentilation Moisture, sunlight, heatFront view Controls, Indicators, Displays and ConnectionsRear view Channel Remote control function buttonsReceiver on the command set Switching over between Remote Control Command SetsButton functions Menu conceptAlphanumeric entries Language selection OSD Sat-IF connection Presetting of the receiving systemConnection and Startup To connect the receiverTV and video recorder connection Inserting batteries in the remote controlLNB supply voltage Modulator connectionFactory setting of the receiver Switching on for the First TimeFirst steps Important on-screen displays OSD On-Screen DisplaysSelecting a TV channel Channel selectionReception status digital Reception status analogue Switching over to radio channelSelecting a radio channel by number entry Timer Settings Mute Sound SettingsSetting the volume Stereo and two-channel sound reproductionSelecting TV and radio channels last received Channel Lists TV/radioFavourite channels To delete a channel To sort the channelsTo add a channel Analogue channel lists To add an analogue channelAdding/Removing Satellites To set up satellitesTo remove satellites To enter a satellite nameCurrent Channel Overview This function cannot be selected in analogue modeFactory setting PasswordEntering a password Parental control Operation in exceptional cases Operation from the Front PanelParental control Setting System ParametersLocal time/timer System parametersPicture format Timer menuSummer time TV typeOSD-Trans Mod.typMod.Ch OSD colourLNB configuration Installation MenuChanging the oscillator frequency Satellite scan Antenna settingsScan completed Press OK button TP setup/scanAnalogue transponder KHz signal DiSEqC UFO setupTone burst Preprogramming is not deleted under Reset Video menu Analogue SettingsDecoder HDP modeAudio mode Audio menuBandwidth Frequency left/rightDe-emphasis Recording Video Recorder ConnectionPlayback Modulator reception Analogue Decoder ConnectionTransferring operating software Data Transfer from Receiver to ReceiverPreparation Transferring channel listTechnical Reference Technical featuresHF features Technical dataScart socket assignments AccessoriesConnection arrangement Connection examplesAnalog DVB Glossary, AbbreviationsDiSEqC Glossary of Technical TermsSymbol rate Satellite ServiceDiSEqC menu DNR IndexIndex Page Page Page Page 998.6252/0800/ZWT/PF Subject to technical modifications