Kathrein UFD 545 manual Technical Reference, Technical features

Page 50

Technical Reference

Technical features

The receiver UFD 545 is equipped with the following features:

Reception of all digital TV channels (free-to-air receiver)

Reception of all analogue television and radio channels

Reception of all radio channels (free-to-air receiver)

Bridged Sat-IF input

Modulator output, channel 21-69

Video text processing for TV set

1800 channel memory slots for TV and radio

Satellite reception frequency range from 950 MHz to 2150 MHz

Freely selectable oscillator frequencies, therefore suitable for all feed systems

Timer programmable for 7 events (once/daily/weekly)

Power switch with mains disconnection

Automatic settings for date and time via DVB data stream

On-screen displays (OSD) in 9 languages (German, English, French, Italian, Spanish, Dutch, Portuguese, Greek, Turkish)

4-digit LED display

22 kHz programmable control signal

DiSEqC 1.1 and tone burst control signal

Operation with UFOmini and UFOmicro

Defeatable LNB supply voltage

Connection socket for data copying function RS232

Channel list sorting functions

Picture format recognition 4:3 and 16:9 with selectable output format

Mute feature

Volume adjustment

Radio button

Infrared remote control

2 SCART sockets (TV and VCR/AUX connection)

Additional audio outputs via Cinch sockets

HF level display for digital signals

50

Image 50
Contents DVB Satellite Receiver Page Foreword Important informationContents Timer Settings Sound Settings Glossary, Abbreviations Glossary of Technical Terms Safety Information Moisture, sunlight, heat Setting-up locationVentilation Mains voltageRear view Controls, Indicators, Displays and ConnectionsFront view Remote control function buttons ChannelSwitching over between Remote Control Command Sets Receiver on the command setAlphanumeric entries Menu conceptButton functions Language selection OSD To connect the receiver Presetting of the receiving systemConnection and Startup Sat-IF connectionModulator connection Inserting batteries in the remote controlLNB supply voltage TV and video recorder connectionFirst steps Switching on for the First TimeFactory setting of the receiver OSD On-Screen Displays Important on-screen displaysReception status digital Channel selectionSelecting a TV channel Switching over to radio channel Reception status analogueSelecting a radio channel by number entry Timer Settings Stereo and two-channel sound reproduction Sound SettingsSetting the volume MuteFavourite channels Channel Lists TV/radioSelecting TV and radio channels last received To sort the channels To delete a channelTo add a channel To add an analogue channel Analogue channel listsTo set up satellites Adding/Removing SatellitesTo enter a satellite name To remove satellitesThis function cannot be selected in analogue mode Current Channel OverviewEntering a password PasswordFactory setting Parental control Operation from the Front Panel Operation in exceptional casesSystem parameters Setting System ParametersLocal time/timer Parental controlTV type Timer menuSummer time Picture formatOSD colour Mod.typMod.Ch OSD-TransInstallation Menu LNB configurationChanging the oscillator frequency Antenna settings Satellite scanTP setup/scan Scan completed Press OK buttonAnalogue transponder DiSEqC UFO setup KHz signalTone burst Preprogramming is not deleted under Reset Analogue Settings Video menuAudio menu HDP modeAudio mode DecoderDe-emphasis Frequency left/rightBandwidth Playback Video Recorder ConnectionRecording Analogue Decoder Connection Modulator receptionTransferring channel list Data Transfer from Receiver to ReceiverPreparation Transferring operating softwareTechnical features Technical ReferenceTechnical data HF featuresAccessories Scart socket assignmentsConnection examples Connection arrangementAnalog Glossary, Abbreviations DVBGlossary of Technical Terms DiSEqCSymbol rate DiSEqC menu ServiceSatellite Index DNRIndex Page Page Page Page 998.6252/0800/ZWT/PF Subject to technical modifications