Kathrein UFD 545 manual To add an analogue channel, Analogue channel lists

Channel Lists – TV/radio

Only alphanumeric and decimal entries are accepted at the positions

∙name,

∙video PID (channel identification),

∙audio PID,

∙PCR PID (PCR = channel clock reference) and

∙audio PID dig.

Incorrect PID entries are indicated with the

displayed message Invalid parameter

Press the Lbutton 3x to return to the TV screen. Confirmation is given that your changes have been saved and the information display of the channel currently received appears for several seconds on the screen.

The new channel is added to the end of the existing channel list.

You can obtain the necessary PIDs from relevant TV and satellite magazines as well as from SAT 1 video text. Refer to section "Notes on operation" for information on how to make alphanumeric entries.

Never change the PIDs without good reason as they affect the identification of the reception signal.

To add an analogue channel

Analogue TV channels always occupy one transponder. Follow the same procedure as for setting up an analogue transponder (see section "Analogue transponder").

Analogue channel lists

When receiving analogue channels, press ito select the channel list which is displayed in white. To identify the required channel move the arrow on the left side

of the list line-by-line by pressing the -+buttons and page-by-page by pressing

the oubuttons.

The indicated channel is selected by pressing Oand the information bar is briefly displayed in white.

26