Kathrein UFD 545 manual DiSEqC UFO setup, KHz signal

Page 41

Installation Menu

DiSEqC (UFO) setup

You should only make changes in this menu when the receiver is to be connected to another receiving system with different features or if changes have been made to the receiving system.

Therefore, take particular note of the information relating to your Sat-IF system. Before making any changes, you should make a note of these settings on the form provided at the end of this User's Guide.

Press the menu buttons M, ouand Oto open the DiSEqC menu.

22 kHz signal

In this menu point you can determine whether the 22 kHz signal is to be used to switch over between the low and high frequency range of a satellite or between 2 satellite positions.

Tone-burst and DiSEqC-signal

A DiSEqC control signal is necessary if more than four control criteria are required in a receiving system.

Which of the setting options, i.e. tone burst or DiSEqC is required depends on the components of the receiving system.

Therefore refer to the description of the components (switchover matrices) of the receiving system.

41

Image 41

Contents DVB Satellite Receiver Page Important information ForewordContents Timer Settings Sound Settings Glossary, Abbreviations Glossary of Technical Terms Safety Information Ventilation Setting-up locationMoisture, sunlight, heat Mains voltageRear view Controls, Indicators, Displays and ConnectionsFront view Channel Remote control function buttonsReceiver on the command set Switching over between Remote Control Command SetsAlphanumeric entries Menu conceptButton functions Language selection OSD Connection and Startup Presetting of the receiving systemTo connect the receiver Sat-IF connectionLNB supply voltage Inserting batteries in the remote controlModulator connection TV and video recorder connectionFirst steps Switching on for the First TimeFactory setting of the receiver Important on-screen displays OSD On-Screen DisplaysReception status digital Channel selectionSelecting a TV channel Reception status analogue Switching over to radio channelSelecting a radio channel by number entry Timer Settings Setting the volume Sound SettingsStereo and two-channel sound reproduction MuteFavourite channels Channel Lists TV/radioSelecting TV and radio channels last received To delete a channel To sort the channelsTo add a channel Analogue channel lists To add an analogue channelAdding/Removing Satellites To set up satellitesTo remove satellites To enter a satellite nameCurrent Channel Overview This function cannot be selected in analogue modeEntering a password PasswordFactory setting Parental control Operation in exceptional cases Operation from the Front PanelLocal time/timer Setting System ParametersSystem parameters Parental controlSummer time Timer menuTV type Picture formatMod.Ch Mod.typOSD colour OSD-TransLNB configuration Installation MenuChanging the oscillator frequency Satellite scan Antenna settingsScan completed Press OK button TP setup/scanAnalogue transponder KHz signal DiSEqC UFO setupTone burst Preprogramming is not deleted under Reset Video menu Analogue SettingsAudio mode HDP modeAudio menu DecoderDe-emphasis Frequency left/rightBandwidth Playback Video Recorder ConnectionRecording Modulator reception Analogue Decoder ConnectionPreparation Data Transfer from Receiver to ReceiverTransferring channel list Transferring operating softwareTechnical Reference Technical featuresHF features Technical dataScart socket assignments AccessoriesConnection arrangement Connection examplesAnalog DVB Glossary, AbbreviationsDiSEqC Glossary of Technical TermsSymbol rate DiSEqC menu ServiceSatellite DNR IndexIndex Page Page Page Page 998.6252/0800/ZWT/PF Subject to technical modifications