Kathrein UFD 545 manual Analogue Decoder Connection, Modulator reception

Page 48

Analogue Decoder Connection

	Since you can receive analogue channels with the receiver UFD 545, it can also be
	connected to a decoder for analogue pay-TV channels.
Note	No further setting is required on decoders that require a video signal and supply a
	switching signal.
	The video signal route of the receiver must be set to external for decoders that do
	not supply a switching voltage (refer to section "Video menu").
	Also take note of the instructions provided with the decoder!
	Use a SCART cable to connect the decoder to the VCR/AUX SCART socket.
Modulator reception
	A decoder cannot be used if satellite reception is transmitted via the
	modulator output of the DVB receiver!

48

Image 48

Contents DVB Satellite Receiver Page Foreword Important informationContents Timer Settings Sound Settings Glossary, Abbreviations Glossary of Technical Terms Safety Information Setting-up location VentilationMoisture, sunlight, heat Mains voltageControls, Indicators, Displays and Connections Front viewRear view Remote control function buttons ChannelSwitching over between Remote Control Command Sets Receiver on the command setMenu concept Button functionsAlphanumeric entries Language selection OSD Presetting of the receiving system Connection and StartupTo connect the receiver Sat-IF connectionInserting batteries in the remote control LNB supply voltageModulator connection TV and video recorder connectionSwitching on for the First Time Factory setting of the receiverFirst steps OSD On-Screen Displays Important on-screen displaysChannel selection Selecting a TV channelReception status digital Switching over to radio channel Reception status analogueSelecting a radio channel by number entry Timer Settings Sound Settings Setting the volumeStereo and two-channel sound reproduction MuteChannel Lists TV/radio Selecting TV and radio channels last receivedFavourite channels To sort the channels To delete a channelTo add a channel To add an analogue channel Analogue channel listsTo set up satellites Adding/Removing SatellitesTo enter a satellite name To remove satellitesThis function cannot be selected in analogue mode Current Channel OverviewPassword Factory settingEntering a password Parental control Operation from the Front Panel Operation in exceptional casesSetting System Parameters Local time/timerSystem parameters Parental controlTimer menu Summer timeTV type Picture formatMod.typ Mod.ChOSD colour OSD-TransInstallation Menu LNB configurationChanging the oscillator frequency Antenna settings Satellite scanTP setup/scan Scan completed Press OK buttonAnalogue transponder DiSEqC UFO setup KHz signalTone burst Preprogramming is not deleted under Reset Analogue Settings Video menu HDP mode Audio mode Audio menu DecoderFrequency left/right BandwidthDe-emphasis Video Recorder Connection RecordingPlayback Analogue Decoder Connection Modulator receptionData Transfer from Receiver to Receiver PreparationTransferring channel list Transferring operating softwareTechnical features Technical ReferenceTechnical data HF featuresAccessories Scart socket assignmentsConnection examples Connection arrangementAnalog Glossary, Abbreviations DVBGlossary of Technical Terms DiSEqCSymbol rate Service SatelliteDiSEqC menu Index DNRIndex Page Page Page Page 998.6252/0800/ZWT/PF Subject to technical modifications