Kathrein UFD 545 manual Controls, Indicators, Displays and Connections, Front view, Rear view

Controls, Indicators, Displays and Connections

In this section you will find a short description of all controls, indicators, displays and connections. The button symbols used here are also used in the description of the operating steps.

Front view

(panel folded down)

	REMOTE	TV/SAT	STAND	BY
CARAVAN DIGITAL ANALOG RECEIVER
	MENU	SELECT

1 2 3 4 5 6 7 8 9

Rear view

Digital Video Broadcasting

1 2 3 4 5 6 7 8 9 10 11 12 13

Controls, indicators and displays on the front panel

1ON/OFF switch (with mains disconnection)

2Menu button to display and exit the menus or submenus

3Acknowledgement for remote control signal

4Select button

to confirm a selection

5Operation indicator

6Standby indicator

7Cursor buttons to move through menu and channel lists as well as to set the volume (corresponds to remote control)

8LED display (four-digit, 7-segment display) to show channel number and time.

9Press catch for front panel

To open press lightly on upper right side

Controls and connections at the rear

1Antenna input (terrestrial)

2Modulator output

3Audio output

2 Cinch socket outputs, left and right channel

4Digital sound output (AC3) – Cinch socket output

5Video output (FBAS)

6SCART socket TV connection

7SCART socket VCR/AUX connection

8DATA input/output socket

Interface for serial data transmission (service)

9Satellite IF signal input

Output of LNB supply voltage and control signals (22 kHz and DiSEqC 1.1)

10Satellite IF signal output Bridged Sat-IF signal

11Satellite IF input for analogue reception

12Mains power input 230 V AC

13DC voltage input 12…24 V

9