Kathrein UFD 545 manual Connection examples, Connection arrangement

Page 53

Technical Reference

Connection examples

Connection arrangement 1:

	R
	Universal LNB
	UAS 177
			External jumper for
			analogue reception
Receiver		Sat-IF
UFD 545
		IF INPUT DIGITAL	IF INPUT
			IF INPUT	UFD 545
		14/18V max.400mA	ANALOG	UFD 545
AUDIO	VIDEO	22kHz	950-2150MHz
AUDIO	VIDEO
L			Elektroschock-Gefahr !
			Elektroschock-Gefahr !
	VCR	DATA I/O	Nicht oeffnen!
	AUX	IF OUTPUT
R		IF OUTPUT
R
			50/60Hz	12V-24V	Scart
			50/60Hz	max.3A
			max.30W
	Cinch
		TV
VHF/UHF	Scart
	Scart
VCR
	VHF/UHF				HiFi

Connection of the DVB-S receiver to a TV set, a VCR and a HiFi system for receiving and recording digital satellite TV and radio channels.

The connection requires two SCART cables and one Cinch cable. If your TV is equipped for stereo, the stereo sound can also be reproduced via the stereo speakers of your TV set.

Video playback takes place via the modulator of the VCR and the antenna input of the TV set.

53

Image 53

Contents DVB Satellite Receiver Page Important information ForewordContents Timer Settings Sound Settings Glossary, Abbreviations Glossary of Technical Terms Safety Information Ventilation Setting-up locationMoisture, sunlight, heat Mains voltageRear view Controls, Indicators, Displays and ConnectionsFront view Channel Remote control function buttonsReceiver on the command set Switching over between Remote Control Command SetsAlphanumeric entries Menu conceptButton functions Language selection OSD Connection and Startup Presetting of the receiving systemTo connect the receiver Sat-IF connectionLNB supply voltage Inserting batteries in the remote controlModulator connection TV and video recorder connectionFirst steps Switching on for the First TimeFactory setting of the receiver Important on-screen displays OSD On-Screen DisplaysReception status digital Channel selectionSelecting a TV channel Reception status analogue Switching over to radio channelSelecting a radio channel by number entry Timer Settings Setting the volume Sound SettingsStereo and two-channel sound reproduction MuteFavourite channels Channel Lists TV/radioSelecting TV and radio channels last received To delete a channel To sort the channelsTo add a channel Analogue channel lists To add an analogue channelAdding/Removing Satellites To set up satellitesTo remove satellites To enter a satellite nameCurrent Channel Overview This function cannot be selected in analogue modeEntering a password PasswordFactory setting Parental control Operation in exceptional cases Operation from the Front PanelLocal time/timer Setting System ParametersSystem parameters Parental controlSummer time Timer menuTV type Picture formatMod.Ch Mod.typOSD colour OSD-TransLNB configuration Installation MenuChanging the oscillator frequency Satellite scan Antenna settingsScan completed Press OK button TP setup/scanAnalogue transponder KHz signal DiSEqC UFO setupTone burst Preprogramming is not deleted under Reset Video menu Analogue SettingsAudio mode HDP modeAudio menu DecoderDe-emphasis Frequency left/rightBandwidth Playback Video Recorder ConnectionRecording Modulator reception Analogue Decoder ConnectionPreparation Data Transfer from Receiver to ReceiverTransferring channel list Transferring operating softwareTechnical Reference Technical featuresHF features Technical dataScart socket assignments AccessoriesConnection arrangement Connection examplesAnalog DVB Glossary, AbbreviationsDiSEqC Glossary of Technical TermsSymbol rate DiSEqC menu ServiceSatellite DNR IndexIndex Page Page Page Page 998.6252/0800/ZWT/PF Subject to technical modifications