Toshiba KV-HD01A manual Alarm Recording, Externally triggered Recording, 60F/S

Page 22

4.2.3 Alarm Recording

Take the following steps to activate the programmed alarm recording. For ALM REC RATE, ALM REC QUALITY, ALARM STATUS, ALM DURATION, and PRE-ALARMsettings, please refer to section 5.4 for more details.

(1) Press the SETUP button to enter the MAIN MENU.

ENTER

/

(2) Select ALARM and press the SAVE ENTER/SAVE button to enter the ALARM SETTING.

(3)Set the desired REC RATE, REC QUALITY, ALM TYPE, and ALM DURATION for use. If pre-alarm recording is required, set PRE-ALARM to ON.

(4)To activate the alarm recording, set ALARM OPERATION to ON. To deactivate it, set ALARM OPERATION to OFF.

MAIN MENU

TIME/ TITLE RECORD TIMER RECORD ALARM COMMUNICATION DISK

SYSTEM

GO TO ALARM PAGE

ALARM SETTING

ALM OPERATION		: OFF
REC RATE		: 60F/S
REC QUALITY		: HIGH
ALM TYPE		: NO
ALM DURATION		: NON STOP
PRE- ALARM		: OFF

MAIN PAGE

ALARM REC ENABLE

4.2.4 Externally triggered Recording

You can use an external switch to turn the recording function of the DVR on/off to record video into the hard-disk drive by connecting the REC exposure contact on the rear panel of the DVR. Please refer to section 2.3 for more details.

21

Image 22

Contents Installation Operating Manual Table of Contents Main Menu SpecificationsLimited Warranty Apendix 4. -- Network ViewingSafety Precautions FCC NoticeManufacturer’s instruction Graphic symbol definitions Symbol Meaning Important Safety InstructionsIndication definitions Meaning Observe the following when installing DisclaimerCopyrights Important PrecautionsDaily or weekly Maintenance Save Original Packing MaterialsProduct Features Product FeaturesProduct Introduction Description of the FRONT/REAR View Front ViewIndicator of Hard Disk Status Indicator of Alarm Recording ModeIndicator of Timer Recording Mode Power IndicatorRear View Terminal Block Connecting with a Multiplexer InstallationConnecting with a Single Camera or a Quad Processor Basic ConnectionRate 6 HR System InformationQuality High Ntsc Size POSUpdating System Software Video format NTSC/PAL selection Basic Operations Configuring Recording SettingsSet up the REC Time Mode when a multiplexer is connected Ntsc SystemManual Recording Recording OperationsPAL System Timer Recording Start ENDREC Enable TIMER---------------------------- SETMain SET REC Timer REC Schedule Start END Timer Main Timer REC EnableExternally triggered Recording Alarm Recording60F/S Place Operation Status Playback OperationsFast Forward/Reverse Slow Forward/Reverse Play Back Picture-by-picturePlay Back Recorded Video from a HDD of the mobile rack Search OperationsFull List Search Time Search Alarm list SearchSearch Full List Alarm List Time Search MM DD Year HH MM SearchSystem GO to Disk Disk Setting Reformat HD 3 Usage Data BackupBackup Operations Main Backup ALL to HDMain Backup Part to HD Total 41 M Ready to GO OK Cancel Alarm Select Main Backup Alarm to HDDisk Setting Reformat HD 3 Usage Save ENTER/SAVE buttonArchive Clips into Floppy Disk Key Lock OperationSave to J0001.JPG Save to J0002.JPG Save to J000N.JPG Main Menu Right/Left buttonsTIME/ Title Time SettingTitle Setting Title StampREC Schedule Start END Record TimerTimer 0600-1600 1200-180060 F/S REC SettingREC Quality Alarm Setting 30SEC, 1 MIN, 5 MIN, 10 MIN, and NON-STOP Communication Comm SettingNET Enable OFF NET Setting SET Main SET RS232 RS232Disk Setting Backup Full Disk REFORMAT/CLEARSystem Flicker ReductionSituation Status HD3Ntsc PAL SpecificationsJpeg General Command Format SetupCommunication Protocol Command Main Category=0x02 Handshake Second Category=0x01 Keys and signalsCommand Types Request Time Second Category=0x02Request State Second Category=0x05 Set Setup Values Second Category=0x04Set Time Second Category=0x02 Description of System StateAppendix 2. -- System Default Slave No Entry for Backup Battery LOWBackup Complete Backup IncompleteSystem Requirements Connecting KV-HD01 to your networkApendix 4. -- Network Viewing KV-HD01APhysical specification for Ethernet Install the browsing software to your PCRJ-45 PIN configuration for Ethernet Open Network ViewerPicture a Picture BPlay List System status indicatorsViewing Image PgUp & PgUpRate Changing The Record & Timer propertiesChanging Record Properties QualityNumber of Saving Save Change the Timer propertiesArchive Images to the computer Abort ExitOpen the Image Viewer Print Viewing a still JPEG-imageQuit StopDigital Video Recorder