Toshiba KV-HD01A manual Playback Operations, Operation Status, Fast Forward/Reverse

Page 24

4.3 Playback Operations

This section shows you how to operate the fast, slow, and single-picture playback functions, and details how the unit is to playback a file in different operation status. Please refer to the following paragraphs specifying the relevant details. When playing a file, the monitor should display a flashing PLAY

message and the PLAY button will light up indicating that the unit is in the playback status.

Operation Status

A. From REC mode to Playback mode

(In live mode, directly press “PLAY” button to play a latest recorded video)

REC→ [Stop] → [Play]	Play the latest recorded file
[Play: to the end of the file]	Show the ending message
	(Using search function to replay
	the file if required)
[Stop] → [Play]	Play the file from the stop position
B. Search to play back a particular recorded video
Search→ [Play]	Play a selected file
[Play to the end of the file]	Show the ending message
	(Search again to replay the file if
	required)
[Stop] → [Play]	Play the file from the stop position
C. Play Back From The Oldest Data
[Stop: Press the “STOP” button for three seconds] → [Play]	play back the oldest recorded video

4.3.1 Fast Forward/Reverse

There are 5 speeds available for playback: 2x, 4x, 8x, 16x, and 30x. While playing back recorded video at recorded speed:

Forward: Press the FWD button to view the recorded video in the forward direction at a speed faster than the recorded speed. Each subsequent press of the FWD button increases the rate.

Reverse: Press the REV button to view the recorded video in the reverse direction at a speed faster than the recorded speed. Each subsequent press of the REV button increases the rate.

Normal: Press the PLAY button to return to the normal speed of playback.

23

Image 24

Contents Installation Operating Manual Table of Contents Specifications Limited WarrantyMain Menu Apendix 4. -- Network ViewingSafety Precautions FCC NoticeManufacturer’s instruction Important Safety Instructions Graphic symbol definitions Symbol MeaningIndication definitions Meaning Observe the following when installing DisclaimerImportant Precautions Daily or weekly MaintenanceCopyrights Save Original Packing MaterialsProduct Features Product FeaturesProduct Introduction Description of the FRONT/REAR View Front ViewIndicator of Alarm Recording Mode Indicator of Timer Recording ModeIndicator of Hard Disk Status Power IndicatorRear View Terminal Block Installation Connecting with a Single Camera or a Quad ProcessorConnecting with a Multiplexer Basic ConnectionSystem Information Quality High NtscRate 6 HR Size POSUpdating System Software Video format NTSC/PAL selection Configuring Recording Settings Set up the REC Time Mode when a multiplexer is connectedBasic Operations Ntsc SystemRecording Operations Manual RecordingPAL System Timer Recording Start ENDTIMER---------------------------- SET Main SET REC Timer REC Schedule Start ENDREC Enable Timer Main Timer REC EnableAlarm Recording Externally triggered Recording60F/S Place Playback Operations Operation StatusFast Forward/Reverse Slow Forward/Reverse Play Back Picture-by-pictureSearch Operations Play Back Recorded Video from a HDD of the mobile rackFull List Search Alarm list Search Search Full List Alarm List Time Search MM DD Year HH MMTime Search SearchData Backup Backup OperationsSystem GO to Disk Disk Setting Reformat HD 3 Usage Main Backup ALL to HDAlarm Select Main Backup Alarm to HD Disk Setting Reformat HD 3 UsageMain Backup Part to HD Total 41 M Ready to GO OK Cancel Save ENTER/SAVE buttonKey Lock Operation Archive Clips into Floppy DiskSave to J0001.JPG Save to J0002.JPG Save to J000N.JPG Main Menu Right/Left buttonsTime Setting Title SettingTIME/ Title Title StampRecord Timer TimerREC Schedule Start END 0600-1600 1200-1800REC Setting 60 F/SREC Quality Alarm Setting 30SEC, 1 MIN, 5 MIN, 10 MIN, and NON-STOP Comm Setting NET Enable OFF NET Setting SET Main SET RS232Communication RS232Disk Setting Backup Full Disk REFORMAT/CLEARSystem Flicker ReductionSituation Status HD3Specifications Ntsc PALJpeg Setup General Command FormatCommunication Protocol Keys and signals Command TypesCommand Main Category=0x02 Handshake Second Category=0x01 Request Time Second Category=0x02Set Setup Values Second Category=0x04 Set Time Second Category=0x02Request State Second Category=0x05 Description of System StateAppendix 2. -- System Default Slave Battery LOW Backup CompleteNo Entry for Backup Backup IncompleteConnecting KV-HD01 to your network Apendix 4. -- Network ViewingSystem Requirements KV-HD01AInstall the browsing software to your PC RJ-45 PIN configuration for EthernetPhysical specification for Ethernet Open Network ViewerPicture a Picture BSystem status indicators Viewing ImagePlay List PgUp & PgUpChanging The Record & Timer properties Changing Record PropertiesRate QualityChange the Timer properties Archive Images to the computerNumber of Saving Save Abort ExitOpen the Image Viewer Viewing a still JPEG-image QuitPrint StopDigital Video Recorder