Toshiba KV-HD01A manual Disk Setting, Backup Full Disk REFORMAT/CLEAR

Page 38

5.6 DISK SETTING

MAIN MENU

TIME/ TITLE RECORD TIMER RECORD ALARM COMMUNICATION DISK

SYSTEM

GO TO DISK PAGE

REFORMAT:

DISK SETTING

REFORMAT

 

: HD 1

HD 3 USAGE

 

: BACKUP

BACKUP

: FULL

DISK REFORMAT/CLEAR

The REFORMAT option is used to clear out all of the data in the hard disk drive. You will be required to enter the pre-set password before proceeding with clearing out the data. Enter the standard password “9999” if you don’t set your individual password. To set your individual password, please refer to section 5.7 PASSWORD option.

HD 1 : Deletes all of the data stored in HD 1.

HD 2 : Deletes all of the data stored in HD 2.

HD 3 : Deletes all of the data stored in HD 3.

HD 1 2 : Deletes all of the data stored in HD 1 and HD 2.

HD 1 3 : Deletes all of the data stored in HD 1 and HD 2.

HD 12 3 : Deletes all of the data stored in HD 1, HD 2 and HD 3.

BACKUP HD : Deletes all of the data stored in HD 3, which is set to backup purpose only. (This function has to be proceeded when the HD 3 USAGE option is set to BACKUP.)

HD 3 USAGE:

The HD 3 USAGE option is used to determine the way to utilize the hard disk drive in the mobile compartment HD 3.

BACKUP : Used for data backup only, which will not be part of regular recording hard disk drive.

REC/ PLAY : Used for regular recording hard disk drive.

Note: When you wish to play back a recorded video from HD3, this option must be set to REC/PLAY.

BACKUP:

The BACKUP option is used to duplicate data from HD 1 and HD 2 to HD 3. (For operation details, please refer to section 4.5.1)

37

Image 38
Contents Installation Operating Manual Table of Contents Main Menu SpecificationsLimited Warranty Apendix 4. -- Network ViewingSafety Precautions FCC NoticeManufacturer’s instruction Indication definitions Meaning Important Safety InstructionsGraphic symbol definitions Symbol Meaning Observe the following when installing DisclaimerCopyrights Important PrecautionsDaily or weekly Maintenance Save Original Packing MaterialsProduct Introduction Product FeaturesProduct Features Description of the FRONT/REAR View Front ViewIndicator of Hard Disk Status Indicator of Alarm Recording ModeIndicator of Timer Recording Mode Power IndicatorRear View Terminal Block Connecting with a Multiplexer InstallationConnecting with a Single Camera or a Quad Processor Basic ConnectionRate 6 HR System InformationQuality High Ntsc Size POSUpdating System Software Video format NTSC/PAL selection Basic Operations Configuring Recording SettingsSet up the REC Time Mode when a multiplexer is connected Ntsc SystemPAL System Recording OperationsManual Recording Timer Recording Start ENDREC Enable TIMER---------------------------- SETMain SET REC Timer REC Schedule Start END Timer Main Timer REC Enable60F/S Alarm RecordingExternally triggered Recording Place Fast Forward/Reverse Playback OperationsOperation Status Slow Forward/Reverse Play Back Picture-by-pictureFull List Search Search OperationsPlay Back Recorded Video from a HDD of the mobile rack Time Search Alarm list SearchSearch Full List Alarm List Time Search MM DD Year HH MM SearchSystem GO to Disk Disk Setting Reformat HD 3 Usage Data BackupBackup Operations Main Backup ALL to HDMain Backup Part to HD Total 41 M Ready to GO OK Cancel Alarm Select Main Backup Alarm to HDDisk Setting Reformat HD 3 Usage Save ENTER/SAVE buttonSave to J0001.JPG Save to J0002.JPG Save to J000N.JPG Key Lock OperationArchive Clips into Floppy Disk Main Menu Right/Left buttonsTIME/ Title Time SettingTitle Setting Title StampREC Schedule Start END Record TimerTimer 0600-1600 1200-1800REC Quality REC Setting60 F/S Alarm Setting 30SEC, 1 MIN, 5 MIN, 10 MIN, and NON-STOP Communication Comm SettingNET Enable OFF NET Setting SET Main SET RS232 RS232Disk Setting Backup Full Disk REFORMAT/CLEARSystem Flicker ReductionSituation Status HD3Jpeg SpecificationsNtsc PAL Communication Protocol SetupGeneral Command Format Command Main Category=0x02 Handshake Second Category=0x01 Keys and signalsCommand Types Request Time Second Category=0x02Request State Second Category=0x05 Set Setup Values Second Category=0x04Set Time Second Category=0x02 Description of System StateAppendix 2. -- System Default Slave No Entry for Backup Battery LOWBackup Complete Backup IncompleteSystem Requirements Connecting KV-HD01 to your networkApendix 4. -- Network Viewing KV-HD01APhysical specification for Ethernet Install the browsing software to your PCRJ-45 PIN configuration for Ethernet Open Network ViewerPicture a Picture BPlay List System status indicatorsViewing Image PgUp & PgUpRate Changing The Record & Timer propertiesChanging Record Properties QualityNumber of Saving Save Change the Timer propertiesArchive Images to the computer Abort ExitOpen the Image Viewer Print Viewing a still JPEG-imageQuit StopDigital Video Recorder