Toshiba KV-HD01A Pause / Step button, Right / Left buttons, Up / Down buttons, Power Indicator

Page 11

PLAY button:

Press to play back a recorded video from the hard disk. While playing back the recorded video at faster or slower speeds than the recorded speed, press this button to return to the regular playback speed.

STOP button:

Press this to stop playing back a recorded video.

FWD button:

Press this to play a recorded video in the forward direction at faster or slower speeds than the recorded speed. Each subsequent press of the FWD button increases or slows the rate.

PAUSE / STEP button:

In a playback display, press this to freeze the display. During the freeze, press this to display one frame/field of a picture at a time in the forward direction.

REC button:

Push this to start recording the video into hard disks while in the live display mode. MUX / DVR button:

When connected to a multiplexer, press the MUX/DVR button to switch between the multiplexer decoded video and the encoded video to be displayed. When the button light is on it indicates the DVR is displaying the decoded video (The pictures are not multiplexing). In this mode, the unit doesn’t display the OSD message of the unit on the screen. However, it doesn’t affect the DVR’s OSD message that is recorded into hard-disk drive. When the button light is off it indicates the DVR is displaying encoded video (The picture is switching swiftly).

Right / Left buttons:

Press these two buttons to highlight desired items in the menu setup mode. For Key Lock operation, simultaneously press these two buttons once to lock the unit; to release Key Lock, simultaneously press these two buttons again.

Up / Down buttons:

Press these two buttons to select the desired contents for programming in the menu setup mode.

ENTER/ ENTER/SAVE Button:

SAVE

Press to enter the selected item and save the setting in the menu setup mode. During the playback of a video, if you wish to save a specific image to a floppy disk, press the PAUSE button to freeze the picture first and then press this button to save the image to a floppy disk.

Indicator of Alarm Recording Mode:

When the scheduled record setting is on, the indicator will light.

Indicator of Timer Recording Mode:

When the alarm record setting is on, the indicator will light.

Indicator of Hard Disk Status:

Indicates the operation status of the hard-disk drives. Green light indicates the hard-disk drive is storing or retrieving the data. Red light signals the hard disk is reaching capacity.

Power Indicator:

Indicates the power status of the DVR.

10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Installation Operating Manual Table of Contents Apendix 4. -- Network Viewing SpecificationsLimited Warranty Main MenuFCC Notice Safety PrecautionsManufacturer’s instruction Indication definitions Meaning Important Safety InstructionsGraphic symbol definitions Symbol Meaning Disclaimer Observe the following when installingSave Original Packing Materials Important PrecautionsDaily or weekly Maintenance CopyrightsProduct Introduction Product FeaturesProduct Features Front View Description of the FRONT/REAR ViewPower Indicator Indicator of Alarm Recording ModeIndicator of Timer Recording Mode Indicator of Hard Disk StatusRear View Terminal Block Basic Connection InstallationConnecting with a Single Camera or a Quad Processor Connecting with a MultiplexerSize POS System InformationQuality High Ntsc Rate 6 HRUpdating System Software Video format NTSC/PAL selection Ntsc System Configuring Recording SettingsSet up the REC Time Mode when a multiplexer is connected Basic OperationsPAL System Recording OperationsManual Recording Start END Timer RecordingTimer Main Timer REC Enable TIMER---------------------------- SETMain SET REC Timer REC Schedule Start END REC Enable60F/S Alarm RecordingExternally triggered Recording Place Fast Forward/Reverse Playback OperationsOperation Status Play Back Picture-by-picture Slow Forward/ReverseFull List Search Search OperationsPlay Back Recorded Video from a HDD of the mobile rack Search Alarm list SearchSearch Full List Alarm List Time Search MM DD Year HH MM Time SearchMain Backup ALL to HD Data BackupBackup Operations System GO to Disk Disk Setting Reformat HD 3 UsageSave ENTER/SAVE button Alarm Select Main Backup Alarm to HDDisk Setting Reformat HD 3 Usage Main Backup Part to HD Total 41 M Ready to GO OK CancelSave to J0001.JPG Save to J0002.JPG Save to J000N.JPG Key Lock OperationArchive Clips into Floppy Disk Right/Left buttons Main MenuTitle Stamp Time SettingTitle Setting TIME/ Title0600-1600 1200-1800 Record TimerTimer REC Schedule Start ENDREC Quality REC Setting60 F/S Alarm Setting 30SEC, 1 MIN, 5 MIN, 10 MIN, and NON-STOP RS232 Comm SettingNET Enable OFF NET Setting SET Main SET RS232 CommunicationBackup Full Disk REFORMAT/CLEAR Disk SettingFlicker Reduction SystemHD3 Situation StatusJpeg SpecificationsNtsc PAL Communication Protocol SetupGeneral Command Format Request Time Second Category=0x02 Keys and signalsCommand Types Command Main Category=0x02 Handshake Second Category=0x01Description of System State Set Setup Values Second Category=0x04Set Time Second Category=0x02 Request State Second Category=0x05Appendix 2. -- System Default Slave Backup Incomplete Battery LOWBackup Complete No Entry for BackupKV-HD01A Connecting KV-HD01 to your networkApendix 4. -- Network Viewing System RequirementsOpen Network Viewer Install the browsing software to your PCRJ-45 PIN configuration for Ethernet Physical specification for EthernetPicture B Picture aPgUp & PgUp System status indicatorsViewing Image Play ListQuality Changing The Record & Timer propertiesChanging Record Properties RateAbort Exit Change the Timer propertiesArchive Images to the computer Number of Saving SaveOpen the Image Viewer Stop Viewing a still JPEG-imageQuit PrintDigital Video Recorder
Top Page Image Contents