Toshiba KV-HD01A manual Main Menu, Right/Left buttons

Page 31

5. MAIN MENU

There are 7 submenus to the MAIN MENU to guide you through the setup of the DVR. The following sections will instruct you step by step now to configure the operation setting and options. Press the SETUP button to access the MAIN MENU. Once inside the menu system, the on-screen menu allows you to set up the key features of the unit. The functions of various buttons within the Main Menu mode are described in the paragraphs below.

MAIN MENU

TIME/ TITLE

RECORD TIMER

RECORD

ALARM

COMMUNICATION

DISK

SYSTEM

KEY FUNCTIONS

ENTER

SAVE

SETUP button :

Press to enter the main menu. Press again to exit the setup mode. RETURN button :

Press to exit the current setup page and return to the previous page.

Right/Left buttons :

Press to select the desired item or entry for the setting.

Up/Down buttons

Press to highlight the desired option or to select the context for the setting.

ENTER/SAVE button :

Press to enter the selected item and to save the settings.

Image 31

Contents Installation Operating Manual Table of Contents Apendix 4. -- Network Viewing SpecificationsLimited Warranty Main MenuFCC Notice Safety PrecautionsManufacturer’s instruction Graphic symbol definitions Symbol Meaning Important Safety InstructionsIndication definitions Meaning Disclaimer Observe the following when installingSave Original Packing Materials Important PrecautionsDaily or weekly Maintenance CopyrightsProduct Features Product FeaturesProduct Introduction Front View Description of the FRONT/REAR ViewPower Indicator Indicator of Alarm Recording ModeIndicator of Timer Recording Mode Indicator of Hard Disk StatusRear View Terminal Block Basic Connection InstallationConnecting with a Single Camera or a Quad Processor Connecting with a MultiplexerSize POS System InformationQuality High Ntsc Rate 6 HRUpdating System Software Video format NTSC/PAL selection Ntsc System Configuring Recording SettingsSet up the REC Time Mode when a multiplexer is connected Basic OperationsManual Recording Recording OperationsPAL System Start END Timer RecordingTimer Main Timer REC Enable TIMER---------------------------- SETMain SET REC Timer REC Schedule Start END REC EnableExternally triggered Recording Alarm Recording60F/S Place Operation Status Playback OperationsFast Forward/Reverse Play Back Picture-by-picture Slow Forward/ReversePlay Back Recorded Video from a HDD of the mobile rack Search OperationsFull List Search Search Alarm list SearchSearch Full List Alarm List Time Search MM DD Year HH MM Time SearchMain Backup ALL to HD Data BackupBackup Operations System GO to Disk Disk Setting Reformat HD 3 UsageSave ENTER/SAVE button Alarm Select Main Backup Alarm to HDDisk Setting Reformat HD 3 Usage Main Backup Part to HD Total 41 M Ready to GO OK CancelArchive Clips into Floppy Disk Key Lock OperationSave to J0001.JPG Save to J0002.JPG Save to J000N.JPG Right/Left buttons Main MenuTitle Stamp Time SettingTitle Setting TIME/ Title0600-1600 1200-1800 Record TimerTimer REC Schedule Start END60 F/S REC SettingREC Quality Alarm Setting 30SEC, 1 MIN, 5 MIN, 10 MIN, and NON-STOP RS232 Comm SettingNET Enable OFF NET Setting SET Main SET RS232 CommunicationBackup Full Disk REFORMAT/CLEAR Disk SettingFlicker Reduction SystemHD3 Situation StatusNtsc PAL SpecificationsJpeg General Command Format SetupCommunication Protocol Request Time Second Category=0x02 Keys and signalsCommand Types Command Main Category=0x02 Handshake Second Category=0x01Description of System State Set Setup Values Second Category=0x04Set Time Second Category=0x02 Request State Second Category=0x05Appendix 2. -- System Default Slave Backup Incomplete Battery LOWBackup Complete No Entry for BackupKV-HD01A Connecting KV-HD01 to your networkApendix 4. -- Network Viewing System RequirementsOpen Network Viewer Install the browsing software to your PCRJ-45 PIN configuration for Ethernet Physical specification for EthernetPicture B Picture aPgUp & PgUp System status indicatorsViewing Image Play ListQuality Changing The Record & Timer propertiesChanging Record Properties RateAbort Exit Change the Timer propertiesArchive Images to the computer Number of Saving SaveOpen the Image Viewer Stop Viewing a still JPEG-imageQuit PrintDigital Video Recorder