Toshiba KV-HD01A manual Safety Precautions, FCC Notice

Page 4

SAFETY PRECAUTIONS

 

The lightening flash with arrowhead

 

symbol, within an equilateral triangle,

 

is intended to alert the user to the

 

presence of uninsulated “dangerous

 

voltage” within the product’s enclosure

 

that may be of sufficient magnitude to

 

constitute a risk of electric shock to

 

persons.

 

The exclamation point within an

 

equilateral triangle is intended to alert

 

the user to the presence of important

 

operating and maintenance (servicing)

 

instructions in the literature

 

accompanying the appliance.

WARNING:

TO REDUCE A RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

 

PRODUCT TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT

 

INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO

 

QUALIFIED PERSONNEL ONLY.

FCC NOTICE:

This equipment has been tested and found to comply with the limits for a Class A digital

 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

 

reason-able protection against harmful interference when the equipment is operated in a

 

commercial environment.

 

This equipment generates, uses, and can radiate radio frequency energy and, if not

 

in-stalled and used in accordance with the instruction manual, may cause harmful

 

interference to radio communications. Operation of this equipment in a residential area is

 

likely to cause harmful interference in which case the user will be required to correct the

 

interference at their own expense.

WARNING:

Your authority to operate this FCC verified equipment could be voided if you make changes

 

or modifications not expressly approved by the party responsible for compliance to Part 15

 

of the FCC rules.

 

This Class A digital apparatus complies with Canadian ICES-003.

 

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

UL

This product is Classified by the Underwriters Laboratories Inc. Representative samples of

 

this product have been evaluated by UL and meet the applicable UL Standards and

 

requirements.

3

Image 4
Contents Installation Operating Manual Table of Contents Specifications Limited WarrantyMain Menu Apendix 4. -- Network ViewingSafety Precautions FCC NoticeManufacturer’s instruction Graphic symbol definitions Symbol Meaning Important Safety InstructionsIndication definitions Meaning Observe the following when installing DisclaimerImportant Precautions Daily or weekly MaintenanceCopyrights Save Original Packing MaterialsProduct Features Product FeaturesProduct Introduction Description of the FRONT/REAR View Front ViewIndicator of Alarm Recording Mode Indicator of Timer Recording ModeIndicator of Hard Disk Status Power IndicatorRear View Terminal Block Installation Connecting with a Single Camera or a Quad ProcessorConnecting with a Multiplexer Basic ConnectionSystem Information Quality High NtscRate 6 HR Size POSUpdating System Software Video format NTSC/PAL selection Configuring Recording Settings Set up the REC Time Mode when a multiplexer is connectedBasic Operations Ntsc SystemManual Recording Recording OperationsPAL System Timer Recording Start ENDTIMER---------------------------- SET Main SET REC Timer REC Schedule Start ENDREC Enable Timer Main Timer REC EnableExternally triggered Recording Alarm Recording60F/S Place Operation Status Playback OperationsFast Forward/Reverse Slow Forward/Reverse Play Back Picture-by-picturePlay Back Recorded Video from a HDD of the mobile rack Search OperationsFull List Search Alarm list Search Search Full List Alarm List Time Search MM DD Year HH MMTime Search SearchData Backup Backup OperationsSystem GO to Disk Disk Setting Reformat HD 3 Usage Main Backup ALL to HDAlarm Select Main Backup Alarm to HD Disk Setting Reformat HD 3 UsageMain Backup Part to HD Total 41 M Ready to GO OK Cancel Save ENTER/SAVE buttonArchive Clips into Floppy Disk Key Lock OperationSave to J0001.JPG Save to J0002.JPG Save to J000N.JPG Main Menu Right/Left buttonsTime Setting Title SettingTIME/ Title Title StampRecord Timer TimerREC Schedule Start END 0600-1600 1200-180060 F/S REC SettingREC Quality Alarm Setting 30SEC, 1 MIN, 5 MIN, 10 MIN, and NON-STOP Comm Setting NET Enable OFF NET Setting SET Main SET RS232Communication RS232Disk Setting Backup Full Disk REFORMAT/CLEARSystem Flicker ReductionSituation Status HD3Ntsc PAL SpecificationsJpeg General Command Format SetupCommunication Protocol Keys and signals Command TypesCommand Main Category=0x02 Handshake Second Category=0x01 Request Time Second Category=0x02Set Setup Values Second Category=0x04 Set Time Second Category=0x02Request State Second Category=0x05 Description of System StateAppendix 2. -- System Default Slave Battery LOW Backup CompleteNo Entry for Backup Backup IncompleteConnecting KV-HD01 to your network Apendix 4. -- Network ViewingSystem Requirements KV-HD01AInstall the browsing software to your PC RJ-45 PIN configuration for EthernetPhysical specification for Ethernet Open Network ViewerPicture a Picture BSystem status indicators Viewing ImagePlay List PgUp & PgUpChanging The Record & Timer properties Changing Record PropertiesRate QualityChange the Timer properties Archive Images to the computerNumber of Saving Save Abort ExitOpen the Image Viewer Viewing a still JPEG-image QuitPrint StopDigital Video Recorder