Barco R9001280 owner manual Set up of the baud rate for communication with a computer

Connections

Straps on module level :

Floating or non-floating input.
Red :	J3	: strap "yes" : non floating	strap "no" : floating
Green : J4		: strap "yes" : non floating	strap "no" : floating
Blue :	J5	: strap "yes" : non floating	strap "no" : floating
H/C :	J6	: strap "yes" : non floating	strap "no" : floating
V : J7 : strap "yes" : non floating			strap "no" : floating

Factory preset : strap "yes", non floating input

Sync selection.

J8 : separate sync or sync on green.

Factory preset : separate sync.

Connecting a computer, e.g. IBM PC (or compatible), Apple Macintosh to the RS 232 input of the projector.

The projector has a RS232 port that allows it to communicate with a computer.

Applications : remote control and VISION communications.

a)remote control :

-easy adjustment of projector via IBM PC (or compat- ible) or MAC connection.

-allow storage of multiple projector configurations and set ups.

-wide range of control possibilities.

-address range from 0 to 255.

b)VISION communications :

-sending VISION to the projector or copying the VISION from the projector to a hard memory device.

Set up of the baud rate for communication with a computer.

The communication speed between projector and computer, e.g. PC or MAC, has 8 possible speeds. With DIP switches S2(1,2,3) on the controller unit, it is possible to select the baud rate (communication speed).

Gaining access to the DIP switches

Power down the projector and unplug the power cord from the wall outlet.

Turn both lock screws with a screwdriver or coin counter clock- wise.

Lift up and pivot the top cover. Attention : the cover is not secured with an incorporated support. When opening, turn it over slowly and lay it down on the second part of the top cover.

The processor module with the DIP switches is located on top, the front left side (seen from the front of the projector, see next page).

J8 Sync selection

Separate sync Sync on green

J3 J4 J5 J6 J7

Non-Floating

Floating

Floating or non floating input

DIAGNOSTICS

IR-ACKNOWLEDG ED CODE IR-RECEIVER

RS232 OUT

IR-RECEIVED

RS232 connection

5975348 BARCOVISION 8200 280497 6-7