Barco R9001280 owner manual Configure, Conversion, Geometry

Page 43

Picture Control in Adjustment Mode

Configure

The configure menu contains two toggle functions : geometry and conversion.

Use the control disk to select Configure and press ENTER.

Conversion

All incoming signals are internally converted to be displayed at its maximum possible dimensions. When conversion is [off], the real input signal is displayed on the screen. Parts of the image cannot be displayed and will be lost.

When conversion is [off], the geometry function is disabled.

Geometry

The Geometry function can only be activated when conversion is [on].

Use the Geometry adjustment to align the image if the projector is mounted under a non standard projection angle.

If the Geometry function has to be adjusted, toggle Geometry to [On] with the ENTER key and press EXIT to return to the Screen Opera- tions menu (previous menu).

Highlight Geometry and press ENTER to select. The geometry menu will be displayed.

SCREEN OPERATIONS

Zoom/Pan

Geometry (off)

Configure

868b

CONFIGURE

Conversion [On]

Geometry [Off]

874

CONFIGURE

Conversion [On]

Geometry [Off]

874

SCREEN OPERATIONS

Zoom/Pan

Geometry

Configure

868c

875

5975348 BARCOVISION 8200 210497		9-7

Image 43

Contents Vision Page Date Rev Art. No 280497 R5975348 Barco Projection SystemsNoordlaan Kuurne Belgium Barco nv/Projection SystemsTable of Contents Service Mode Mains lead AC Power cord with CEE 7 plug Safety InstructionsInstallation instructions General safety instructionsPrescriptions de securite générales Instructions pour l’installationRemarque sur la Sécurité Fédéral communication commission FCC statementOn Repacking On InstallationOn Cleaning On ServicingRé-emballage ’InstallationEntretien et Réparation NettoyageUnpacking Projector dimensionsBarcovision Battery installation in the RCU Which screen type? Installation guidelinesEnvironment What about ambient light ?Inputs and computer video format input compatibility Where to install the projector?How to install a projection lens? Definitions of the Abbreviation on drawingsLocal keypad Location and Functions of ControlFront panel terminology Control Panel TerminologyTerminology Remote controlRCU Installation SET UP System Settings Fuses Power mains cord connectionSwitching on ConnectionsInput connections Switching to stand-by Switching offInput module insertion into the projector Straps on module level Video/S-video input moduleRGB input selection RGB analog input moduleComponent input selection Component input moduleIndication on the input slot menu Input selection RGB3S/RG3sB input moduleSet up of the baud rate for communication with a computer OFF OFF OFF On OFF OFF OFF on OFF Connecting a Rcvds 05 to the projectorConnecting a VS05 to the projector Connecting an IR Remote Receiver 800 to the projectorProjector address How to use the RCU?Hardware set up of the projector address ControllingHow to control the projector or projectors How to display a projector address?How to program an address into the RCU? Picture controls with direct accessHow to get source information? Software version How to get a summary of your projector?Installation of the settings for a input source Source SET UPInput selection Enter Edit fileEdit File Options Copy RenameDelete MoveOptions Source Set Up Video offset Signal operationsGain Sync Fast/Slow Gain adjustment per colorSmoothness Still video On/OffZoom/pan Screen operationsMoves the window upwards Picture Compresses the picture in the horizontal direction Conversion ConfigureGeometry Picture Control in Adjustment Mode 10-1 Service ModeHow to activate the password function? Start up of the Service mode0000 Convergence adjustment of the LCD panelsRed on green convergence Green focusingBlue on green convergence Reset Lamp Run Time Modify passwordLamp Run Time History 10-6 Barcovision 8200 Standard source set up files Standard Source SET UP FilesStandard Source Set Up Files Battery replacement in the RCU Battery Replacement in the RCULens Cleaning Procedure Focusing the lensLenses Lenses Source numbers 90 Source Numbers 90Insert Card