How to get source information?

Controlling

Brightness Control

A correct 'brightness' setting is important for good image reproduc- tion.

Use the + button for a higher brightness. Use the - button for a lower brightness.

Contrast Control

A correct 'contrast' setting is important for good image reproduction. Adjust the contrast to the level you prefer, according to room lighting conditions.

Use the + button for a higher contrast. Use the - button for lower contrast.

Color Saturation

Color saturation is only active for Video and S-Video. Adjust the color intensity of the picture.

Use the + button for richer colors. Use the - button for lighter colors.

Tint Control

Tint is only active for Video and S-Video when using the NTSC 4.43 or NTSC 3.58 system.

Use the + button Use the - button.

Sharpness Control.

Use the + button for a sharper picture.

Use the - button for a softer picture.

Phase Control

Use the control stick to adjust the phase.

The projector can give information about its input configuration (inserted modules and 800 peripherals connection) in a menu box. To get this information, call the Main menu by pressing the ENTER key.

Highlight System Settings by pushing the control disk up or down and press ENTER to select this option. The System Settings menu will be displayed on the screen.

Highlight Input Slots by pushing the control disk up or down and press ENTER to select.

The projector's controller will scan the input slots and displays the result in the Input Slots menu.

Next to the digits you find the name of input slots. The controller starts counting from left to right when you are in front of the projector and looking to the lens.

If a RCVDS (switched on) or VS05 is connected to the projector, it will be also indicated on the menu by adding + 800 peripheral. If no 800 peripheral indication is made on the menu, there are still two possi- bilities :

-no RCVDS or VS05 connected or

-RCVDS is switched off.

When a 800 peripheral is connected to the projector, the input slots are not accessible with the up or down arrow key to toggle their function.

If an input slot is empty, the indication no module is added next to the corresponding slot number in the input slots menu.

EXIT : returns to the System Settings menu.

MAIN MENU

Picture Control