Barco R9001280 Source SET UP, Input selection, Installation of the settings for a input source

Page 31

Source Set Up

8

SOURCE SET UP

 

Input selection

Use the numeric keys on the RCU or use the local key pad to select the corresponding input slot.

The source settings has to be installed for each source when these sources are displayed for the first time.

Installation of the settings for a input source.

Start up the adjustment mode by pressing ENTER. The main menu will be displayed. Push the joy stick key forward or backward to highlight File service.

ENTER selects the highlighted item and continues to the next step. EXIT returns always to the previous step.

*Select the LOAD function to install the correct file. Only the files which can be used for this source will be shown. (See appendix A for a list of the standard available files).

File annotation :

xxxxxxxx.xxx (Sx, xxxXxxxi)

I or blank : i = interlaced, blank = not interlaced

xxxXxxx : active pixel rating

Sx : source number

xxx: file extension, first character is C (for custom made files) or S (for standard files).

The second and third character is used for a following number (=file index) file index for custom files : 00 to 63.

xxxxxxxx: base name, 8 characters.

The projector leaves the factory with different custom files installed.

Push the control disk up or down to select LOAD and press ENTER to display the Load menu.

The Load menu displays the corresponding files depending on the installed search pattern. This search pattern can be "Fit" or "All". To change the search pattern, push the control disk to the right to select "search pattern" and press ENTER to change the annotation between brackets.

"All" : all available files will be displayed.

"Fit" : only the best fitting files will be displayed (with a distinction of ± 2 lines and line duration distinction of ± 300 ns)

5975348 BARCOVISION 8200 210497

MAIN MENU

Picture Control

System Settings

File service

Service Mode

832c

FILE SERVICE

Load

Edit

Rename

Copy

Move

Delete

Options

 

 

 

847

LOAD FILE

pal

.s1 (s1.

675x278i)

pal

.c50

(s1.

675x278i)

secam .s3

(s3.

675x278i)

pal

.c50 (s1. 675x278i)

Search pattern : [Fit]

 

 

 

849

 

 

 

8-1

Image 31
Contents Vision Page Date Rev Art. No 280497 R5975348 Barco Projection SystemsNoordlaan Kuurne Belgium Barco nv/Projection SystemsTable of Contents Service Mode Mains lead AC Power cord with CEE 7 plug Safety InstructionsInstallation instructions General safety instructionsPrescriptions de securite générales Instructions pour l’installationRemarque sur la Sécurité Fédéral communication commission FCC statementOn Repacking On InstallationOn Cleaning On ServicingRé-emballage ’InstallationEntretien et Réparation NettoyageUnpacking Projector dimensionsBarcovision Battery installation in the RCU Which screen type? Installation guidelinesEnvironment What about ambient light ?Inputs and computer video format input compatibility Where to install the projector?How to install a projection lens? Definitions of the Abbreviation on drawingsLocal keypad Location and Functions of ControlFront panel terminology Control Panel TerminologyTerminology Remote controlRCU Installation SET UP System Settings Fuses Power mains cord connectionSwitching on ConnectionsInput connections Switching to stand-by Switching offInput module insertion into the projector Straps on module level Video/S-video input moduleRGB input selection RGB analog input moduleComponent input selection Component input moduleIndication on the input slot menu Input selection RGB3S/RG3sB input moduleSet up of the baud rate for communication with a computer OFF OFF OFF On OFF OFF OFF on OFF Connecting a Rcvds 05 to the projectorConnecting a VS05 to the projector Connecting an IR Remote Receiver 800 to the projectorProjector address How to use the RCU?Hardware set up of the projector address ControllingHow to control the projector or projectors How to display a projector address?How to program an address into the RCU? Picture controls with direct accessHow to get source information? Software version How to get a summary of your projector?Installation of the settings for a input source Source SET UPInput selection Enter Edit fileEdit File Options Copy RenameDelete MoveOptions Source Set Up Video offset Signal operationsGain Sync Fast/Slow Gain adjustment per colorSmoothness Still video On/OffZoom/pan Screen operationsMoves the window upwards Picture Compresses the picture in the horizontal direction Conversion ConfigureGeometry Picture Control in Adjustment Mode 10-1 Service ModeHow to activate the password function? Start up of the Service mode0000 Convergence adjustment of the LCD panelsRed on green convergence Green focusingBlue on green convergence Reset Lamp Run Time Modify passwordLamp Run Time History 10-6 Barcovision 8200 Standard source set up files Standard Source SET UP FilesStandard Source Set Up Files Battery replacement in the RCU Battery Replacement in the RCULens Cleaning Procedure Focusing the lensLenses Lenses Source numbers 90 Source Numbers 90Insert Card