Safety Instructions
1 | SAFETY INSTRUCTIONS |
|
Projectors are built in accordance with the requirements of the international safety standards IEC950, UL 1950 and CSA C22.2 No. 950, which are the safety standards of information technology equip- ment including electrical business equipment.
Warning
To prevent fire or electrical shock hazard, do not expose this
projector to rain or moisture
These safety standards impose important requirements on the use of safety critical components, materials and isolation, in order to protect the user or operator against the risk of electric shock and energy hazard, and having access to live parts.
Safety standards also impose to the internal and external temperature rises, radiation levels, mechanical stability and strength, enclosure construction and protection against risk of fire.
Simulated single fault condition testing ensures the safety of the equipment to the user even when the equipment's normal operation fails.
Installation instructions
Before operating your projector please read this manual thoroughly, and retain it for future reference.
Installation and preliminary adjustments should be performed by qualified BARCO personnel or authorized BARCO service dealers.
OWNER’S RECORD
The part number and serial number are located at the front of the projector. Record these numbers in the spaces provided below. Refer to them whenever you call upon your BARCO dealer regarding this product.
Federal communication commission (FCC statement)
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio commu- nications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Instructions to the user :
if this equipment does cause interference to radio or television reception, the user may try to correct the interference by one or more of the following measures :
-
-Relocate the equipment with respect to the receiver.
-Plug the equipment into a different outlet so that the equipment and receiver are on different branch circuits.
• Fasten cables connectors to the equipment by mounting screws.
Note :
The use of shielded cables is required to comply within the limits of Part15 of FCC rules and EN55022.
PART NUMBER:
SER. NUMBER:
DEALER:
The lightning flash with an arrowhead within a triangle is intended to tell the user that parts inside this product are risk of electrical shock to persons.
The exclamation point within a triangle is intended to tell the user that important operat- ing and/or servicing instructions are included in the technical documentation for this equip- ment.
General safety instructions.
*All the safety and operating instructions should be read before using this unit.
*The operating instructions manual should be retained for future reference.
*All warnings on the projector and in the documentation manuals should be adhered to.
*All instructions for operating and use of this equipment must be followed precisely.
ON SAFETY
*This product should be operated from an AC power source. This projector may be connected to an
*This product is equipped with a
WARNING FOR THE CUSTOMERS: THIS APPARATUS MUST BE GROUNDED (EARTHED) via the supplied 3 conductor AC power cable.
(If the supplied power cable is not the correct one, consult your dealer.)
Mains lead (AC Power cord) with CEE 7 plug:
The colors of the mains lead are colored in accordance with the following code:
Blue:Neutral
Brown:Line
5975348 BARCOVISION 8200 210497 |
| |
|