18 English
Question | Answer |
Why does the video | Interference may occur when the parent unit is out of range of the |
display flicker? | baby unit. Interference may also occur if there are too many walls or |
| ceilings between the parent unit and the baby unit or when other |
| 2.4GHz wireless devices are switched on (e.g. microwave, internet). |
| Put the parent unit in a different place, closer to the baby unit, or |
| switch off other wireless devices. |
| The rechargeable battery of the parent unit may need to be charged. |
Why isn’t there any | The parent unit may be in the automatic screen activation mode. |
image on the video | Press the automatic screen activation button again to switch on the |
display when the power- | video display. |
on light is on? |
|
Why isn’t the image on the video display clear?
Why doesn’t the parent unit work in the automatic screen activation mode?
The display brightness may be set too low. Increase the display brightness (see chapter ‘Features’).
The distance between the baby and the baby unit may be too large. Make sure that the baby unit is placed 1 to 1.5 metres/3 to 5 feet away from the baby.
Why isn’t the image on the video display clear in night vision?
Why doesn’t the battery symbol appear on the video display of the parent unit when I start to charge the parent unit?
Why doesn’t the parent unit charge when I have plugged it in?
The distance between the baby and the baby unit may be too large. Make sure that the baby unit is placed 1 to 1.5 metres/3 to 5 feet away from the baby.
It may take a few minutes before the battery symbol appears on the video display of the parent unit when you charge the parent for the first time or after a long period of
The rechargeable battery may have reached the end of its life. Replace the rechargeable battery.