EverFocus EPTZ 100 manual Installation, Mechanical, Ceiling mount

Page 11

3 INSTALLATION

3.1MECHANICAL

3.1.1 Ceiling mount

The ceiling mount accessories are included in the EPTZ 100 package. 1. Use the drilling template to mark the drilling holes.

1

2)Click the connector board into the ceiling adapter. Follow the red arrow marks at board and ceiling adapter for correct position.

3

2

 

Connector

 

 

board

d t

 

 

 

 

C ili

3)Mount the ceiling adapter and connector board to the ceiling. For the cables, use either the side outlet or a hole in the ceiling.

4)Plug the dome module in the ceiling adapter. Make sure that the position of the camera module connector fits the connector position of the connector board.

5)After plug-in, turn the camera module some degrees clockwise to latch the camera module.

6

4

5

6) Use the hex key to fix the camera position with the locking screw.

11

EPTZ100_ma_en_rev03.doc

Image 11
Contents Eptz Weee Safety WarningsTable of Contents Device Setting Camera Delivery Scope FeaturesOptional Accessories IntroductionCommunication SpecificationsAlarm CameraPhysical / environment PowerDimensions with recessed ceiling mount adapter DimensionsDimensions with ceiling mount adapter Dimensions wall bracket Eptz 100 WLM Dimension Eptz 100 with wall mount bracket Eptz 100 WLMDimension ceiling pendant bracket Eptz 100 CPM Dimension Eptz 100 with ceiling pendant bracket Eptz 100 CPMCeiling mount InstallationMechanical Recessed ceiling mount Wall mount Ceiling pendant mount Video PowerElectrical 3 RS-485 3.1 RS-485 installation with EKB 500 keyboard 3.2 RS-485 installation with EverFocus DVR Alarm Baud rate and Protocol Communication Settings2 RS-485 ID address EPTZ100maenrev03.doc 3 RS-485 bus termination OSD Menu SetupOperation in Setup Menu Initial StartOSD Structure Part Menu StructureControl Display Main menuSystem info White BAL Advanced setting camera setupMain Setup CAM Title CameraAuto BacklightMotion DET FocusExposure Brightness Zoom POS InitLens Init ENDSpecial User PresetUart Mode RET PKT Enable ResetScan GROUP2 TiltLevel GROUP1 SpeedPatrol Tour ScanGROUP1 Delete PatternRecord PreviewControl MASK1~4 Privacy MaskInitialize General key description Operation with EKB 500 KeyboardOperation outline EKB 500 Operation with Everfocus Protocol EVF-2Autopan Eptz 100 setup menuPreset positions Pattern tours Preset toursRemote switching of Eptz 100 output relay Switch Alarm Out 1-8 on Switch Alarm Out 1-8 OFFEKB 500 Operation with PELCO-D/P Protocol Group 2 Tour ALL Preset TourPatrol Tour Group 1 TourSwitch relay OFF CLR + F4 1 Enter Switch Alarm Out Switch relay on F4 1 EnterDevice Setting Camera Appendix a Basic Settings AT EKB 500 KeyboardCOM Port Setting RS-485 Interface Setting System I/O Control menu Appendix B Basic Settings AT Everfocus DVREDR / Edvr / Edsr Series Except EDSR100, EDSR100H Ecor / Paragon SeriesGeneral Malfunction Recovering Communication Settings of Camera ModuleChina Subsidiary Japan Subsidiary Head Office USA Subsidiary European Subsidiary