5.1EKB 500 OPERATION WITH EVERFOCUS PROTOCOL (EVF-2)
Operation outline
Function | Keys / operation |
Open dome menu | MENU or CAM (hold) + MENU (if main monitor of DVR is selected) |
| or SHIIFT (hold)+ POSIITIION > 95 |
Switch menu functions | JOYSTIICK |
Change menu settings | JOYSTIICK |
Leave dome menu | CLR (hold) + MENU or menu item EXIT > ENTER |
Pan/tilt | JOYSTIICK |
Zoom TELE / WIDE | TELE: ZOOM IIN or JOYSTIICK rotation to the right |
| WIDE: ZOOM OUT or JOYSTIICK rotation to the left |
Focus | TELE: FOCUS F.. ; WIDE: FOCUS N.. |
Iris open / close | Open iris: IIRIIS + / close iris: IIRIIS |
Go to position (preset) | Preset number + POSIITIION / POSIITIION + preset number > ENTER |
Save position (preset) | SHIIFT (hold) + POSIITIION > preset number > ENTER |
Delete preset | CLR (hold) + POSIITIION > preset number > ENTER |
Start patrol tour | TOUR > 1 > ENTER |
Start all preset tour | TOUR > 2 > ENTER |
Start preset tour Group 1 | TOUR > 3 > ENTER |
Start preset tour Group 2 | TOUR > 4 > ENTER |
Start preset tour Group 3 | TOUR > 5 > ENTER |
Start preset tour Group 4 | TOUR > 6 > ENTER |
Start preset Tour Scan | TOUR > 7 > ENTER |
Start pattern 1 | TOUR > 17 > ENTER |
Start pattern 2 | TOUR > 18 > ENTER |
Start pattern 3 | TOUR > 19 > ENTER |
Start pattern 4 | TOUR > 20 > ENTER |
Start autopan | A..PAN > speed [enter any value, the speed is defined in OSD |
| menu]> ENTER |
360° autopan | SHIIFT (hold) + A..PAN > speed [enter any value, the speed is |
| defined in OSD menu]> ENTER |
Start home position | HOME |
Switch ON output relay | F4 > 1 > ENTER |
Switch OFF output relay | CLR + F4 > 1 > ENTER |
PTZ - Initialization | POSIITIION > 80 > ENTER |
39 | EPTZ100_ma_en_rev03.doc |